Altronix HUBSAT42WPI 4 Channel Passive UTP Transceiver Hub with Integral Camera Power
Product Highlights
The Altronix HubSat42i Passive UTP Transceiver Hub w/Integral Isolated Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 4 camera channels in a outdoor wall mount enclosure. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC fixed or PTZ cameras. In addition, the unit features individually selectable 24VAC or 28VAC electronically isolated fuse protected outputs with surge suppression. Optionally, the HubSat42i can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay, HubWayLD or HubWayLDH Passive and Active UTP Transceiver Hubs. In addition, the HubSat42i provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.
Features
- Individual selectable 24VAC or 28VAC power outputs with OFF position
- Unit provides up to 1 amp max. per channel not to exceed a total of 4 amp maximum current
- Four (4) PTC protected outputs
- Main fuse (internal) is rated at 3.5 amp/250V
- Input 115VAC 60Hz, 1.25 amp
| Condition | New |
|---|---|
| Brand | Altronix |
| Balun Type | Transceiver Hub |
| Channels | 4 |
| Features | Data, Power |
| Type | Passive |
| Input Voltage | 115 VAC |
| Rack Mountable | No |
| Integral Camera Power | With Power |
| Channels | 4 |
| Connection Type | RS422, RS485 |
| Form | Wall Mount |
The Altronix HubSat42i Passive UTP Transceiver Hub w/Integral Isolated Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 4 camera channels in a outdoor wall mount enclosure. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC fixed or PTZ cameras. In addition, the unit features individually selectable 24VAC or 28VAC electronically isolated fuse protected outputs with surge suppression. Optionally, the HubSat42i can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay, HubWayLD or HubWayLDH Passive and Active UTP Transceiver Hubs. In addition, the HubSat42i provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.
Features
- Individual selectable 24VAC or 28VAC power outputs with OFF position
- Unit provides up to 1 amp max. per channel not to exceed a total of 4 amp maximum current
- Four (4) PTC protected outputs
- Main fuse (internal) is rated at 3.5 amp/250V
- Input 115VAC 60Hz, 1.25 amp
| Condition | New |
|---|---|
| Brand | Altronix |
| Balun Type | Transceiver Hub |
| Channels | 4 |
| Features | Data, Power |
| Type | Passive |
| Input Voltage | 115 VAC |
| Rack Mountable | No |
| Integral Camera Power | With Power |
| Channels | 4 |
| Connection Type | RS422, RS485 |
| Form | Wall Mount |
Customers also viewed
Check items to add to the cart or select all
