RVS Systems RVS-2782 Backup Camera System For Tractor-Trailer With Integrated Sensors Automobile Cameras, 4 Camera Setup
Product Highlights
The RVS-2782 system features a 7" quad view monitor, two side cameras with a 120° viewing angle, a backup camera with 18 infra-red illuminators, and a flushmount forward facing camera. All of the cameras are completely waterproof. For complete protection, we’ve added four waterproof backup sensors with an enhanced rugged mount. The RVS-2782 also features our commercial grade quick connect kit, allowing you to wire the truck and trailer separately and connect with just one pigtail cable.
The RVS-619NQ 7" TFT LCD Quad View Color Mirror Monitor attaches to the windshield replacing the existing rear view mirror. The ability to connect up to 4 cameras means that you will never miss anything in your surroundings. This replacement mirror monitor fits all Ford, Chevy, Dodge and Sprinter vehicles from 2010 and onward. The RVS-112-W Vehicle Reversing Aid is an automatic backup alert system that warns drivers of potential obstacles behind their vehicle - up to 8ft away! The cables, control module, and sensors are all waterproof, allowing you to install all components outside the vehicle.
The RVS-770-4 commercial grade backup camera is the clearest and greatest camera available on the market today. It boasts a 410,000 pixel 2.5 mm lens with 18 infra-red illuminators which enable you to see in total darkness and a built in microphone which enables you to hear what is behind you. The backup camera is completely weatherproof with an IP69K rating, strong and reliable, shock resistant with a 20G vibration and 100G impact rating (highest in the industry). The RVS-775 is 120° angle side camera is the clearest and greatest camera available on the market today. It boasts a 250,000 pixel 2.1 mm lens with 9 infra-red illuminators which enables you to see in total darkness. The casing of the camera has a IP68 rating which can withstand all weather conditions.
The RVS-2135-A is a mounting bracket for the front of the trailer with a three camera split to connect to the three camera cables. The RVS-2135-B is the curly pigtail cable that goes between vehicles and the RVS-2135-C is a 26' cable for the tow vehicle with a mounting bracket for the back of the vehicle which splits into three at the front of the vehicle to connect to the power harness. The RVS-102N is a 16' Camera Extension Cable with 5 Pin Screw On Male Connection and 5 Pin Screw On Female Connection. The RVS-103N is a Camera Extension Cable with 5 Pin Screw On Male Connection and 5 Pin Screw On Female Connection. The RVS-885 is a 50 foot camera cable with double-sided female aircraft grade connectors. This cable runs the length of the vehicle, from the camera to the multiplexer or power harness.
The RVS-SE mounts offer a rugged housing for four sensors. Protect your systems against rough handling, roadwear, construction sites and other conditions that might affect your investment in safety. These mounts also add versatility to your installation. Mounts can be installed horizontally or vertically. The RVS-619-M universal windshield mounting pin was designed for vehicles without a rear view mirror or rear view mirror mount. The RVS-619-M is installed on the windshield and attaches to the mounting bracket of all Rear View Safety replacement mirror mounted rear view monitors.
Features
- Quad View - Multiple Viewing Options
- Backup Camera System with Four Cameras
- Four Intelligent Sensors Mount to Rear of Vehicle
- Commercial Grade Trailer Tow Quick Connect Kit
- Completely Waterproof Cameras With Excellent Night Vision
- Four sensors mount to vehicle's bumper
- Alerts you with distance to obstacles behind you
- Completely Waterproof - IP69K Rating
- 18 Infra-Red Lights - 50ft of Night Vision
Condition | New |
---|---|
Brand | RVS Systems |
Synchronization | Internal Synchronization |
Weatherproof | IP68 |
Video Output | 1Vp-p 75 Ω |
Lens Size | 2.1mm |
Camera Signal | Analog |
Lens Type | Fixed |
Image Device | 1/4" Sharp® Color CCD |
Infrared Distance | 0~60 Feet |
Resolution | < 1MP |
Sensor Option | 1/4" Sharp® Color CCD |
IR Distance | 50ft/15.24m |
S/N Ratio | More than 48dB |
Power Consumption | 5W |
Operating Temperature | -40°C ~ +80°C / RH 95% Max |
Minimum Scene Illumination | 0 Lux (IR On) |
Audio | Yes |
Auto Gain Control | Yes |
The RVS-2782 system features a 7" quad view monitor, two side cameras with a 120° viewing angle, a backup camera with 18 infra-red illuminators, and a flushmount forward facing camera. All of the cameras are completely waterproof. For complete protection, we’ve added four waterproof backup sensors with an enhanced rugged mount. The RVS-2782 also features our commercial grade quick connect kit, allowing you to wire the truck and trailer separately and connect with just one pigtail cable.
The RVS-619NQ 7" TFT LCD Quad View Color Mirror Monitor attaches to the windshield replacing the existing rear view mirror. The ability to connect up to 4 cameras means that you will never miss anything in your surroundings. This replacement mirror monitor fits all Ford, Chevy, Dodge and Sprinter vehicles from 2010 and onward. The RVS-112-W Vehicle Reversing Aid is an automatic backup alert system that warns drivers of potential obstacles behind their vehicle - up to 8ft away! The cables, control module, and sensors are all waterproof, allowing you to install all components outside the vehicle.
The RVS-770-4 commercial grade backup camera is the clearest and greatest camera available on the market today. It boasts a 410,000 pixel 2.5 mm lens with 18 infra-red illuminators which enable you to see in total darkness and a built in microphone which enables you to hear what is behind you. The backup camera is completely weatherproof with an IP69K rating, strong and reliable, shock resistant with a 20G vibration and 100G impact rating (highest in the industry). The RVS-775 is 120° angle side camera is the clearest and greatest camera available on the market today. It boasts a 250,000 pixel 2.1 mm lens with 9 infra-red illuminators which enables you to see in total darkness. The casing of the camera has a IP68 rating which can withstand all weather conditions.
The RVS-2135-A is a mounting bracket for the front of the trailer with a three camera split to connect to the three camera cables. The RVS-2135-B is the curly pigtail cable that goes between vehicles and the RVS-2135-C is a 26' cable for the tow vehicle with a mounting bracket for the back of the vehicle which splits into three at the front of the vehicle to connect to the power harness. The RVS-102N is a 16' Camera Extension Cable with 5 Pin Screw On Male Connection and 5 Pin Screw On Female Connection. The RVS-103N is a Camera Extension Cable with 5 Pin Screw On Male Connection and 5 Pin Screw On Female Connection. The RVS-885 is a 50 foot camera cable with double-sided female aircraft grade connectors. This cable runs the length of the vehicle, from the camera to the multiplexer or power harness.
The RVS-SE mounts offer a rugged housing for four sensors. Protect your systems against rough handling, roadwear, construction sites and other conditions that might affect your investment in safety. These mounts also add versatility to your installation. Mounts can be installed horizontally or vertically. The RVS-619-M universal windshield mounting pin was designed for vehicles without a rear view mirror or rear view mirror mount. The RVS-619-M is installed on the windshield and attaches to the mounting bracket of all Rear View Safety replacement mirror mounted rear view monitors.
Features
- Quad View - Multiple Viewing Options
- Backup Camera System with Four Cameras
- Four Intelligent Sensors Mount to Rear of Vehicle
- Commercial Grade Trailer Tow Quick Connect Kit
- Completely Waterproof Cameras With Excellent Night Vision
- Four sensors mount to vehicle's bumper
- Alerts you with distance to obstacles behind you
- Completely Waterproof - IP69K Rating
- 18 Infra-Red Lights - 50ft of Night Vision
Condition | New |
---|---|
Brand | RVS Systems |
Synchronization | Internal Synchronization |
Weatherproof | IP68 |
Video Output | 1Vp-p 75 Ω |
Lens Size | 2.1mm |
Camera Signal | Analog |
Lens Type | Fixed |
Image Device | 1/4" Sharp® Color CCD |
Infrared Distance | 0~60 Feet |
Resolution | < 1MP |
Sensor Option | 1/4" Sharp® Color CCD |
IR Distance | 50ft/15.24m |
S/N Ratio | More than 48dB |
Power Consumption | 5W |
Operating Temperature | -40°C ~ +80°C / RH 95% Max |
Minimum Scene Illumination | 0 Lux (IR On) |
Audio | Yes |
Auto Gain Control | Yes |