Pelco SD429-PRE1-X Indoor/Outdoor Grey Clear Analog Dome Camera, 29X Lens
Product Highlights
Pelco SD429-PRE1-X | Day/Night | On Screen Display Menu | Solid-State Sensors for Internal Temperature, Pressure and Dew Point | On-Screen Alert Modes | Built-in Back Box Memory. Buy Now.
The SD429-PRE1-X from Pelco is a dome system provides ultimate protection of the camera optics and electronics from moisture, corrosive gases, and airborne contaminants. Domes are easily pressurized with dry nitrogen to 8 psig (55 kPa) before or after installation to stabilize the environment inside the system.
Sensors strategically placed in the dome system send an "Alert" message when changes in internal pressure, temperature, or dew point are beyond factory-set acceptable limits. The sensors also allow for instant on-screen display of internal temperature, pressure, and dew point.
Features
- Pressurized to 8 psig (55 kPa)
- Solid-State Sensors for Internal Temperature, Pressure, and Dew Point
- On-Demand Environmental Status Display for Internal Temperature, Pressure, and Dew Point
- On-Screen Alert Modes
- On-Screen Programmable Menus for Pan/Tilt, Camera, and Sensor Alert Settings
- Built-in Back Box Memory
- Integrated Passive UTP Circuit
- 2 Auxiliary Outputs and 7 Alarm Inputs
- Environmental Pendant Style Back Box
- Stainless Steel Construction
- Meets NEMA Type 6P and IP67 Standards
- Compatible with 29X Spectra IV SE Dome Drives
- Built-in Power Line Surge and Limited Lightning Protection
| Condition | New |
|---|---|
| Features | Auto Gain Control, Day/Night, Heater & Fan, On Screen Display Menu, Weather Resistant |
| NDAA Compliance | Yes |
| Brand | Pelco |
| Weatherproof | IP67 |
| Signal System | PAL |
| Lens Size | 29X |
| Camera Signal | Analog |
| Lens Type | Motorized Zoom |
| Durability | Indoor, Weather Resistant |
| Infrared Distance | Non Infrared |
| Resolution | < 1MP |
| Voltage | 24vDC, 24vAC |
| Operating Temperature | Maximum 140°F (60°C) absolute maximum; 122°F (50°C) sustained maximum, Minimum –60°F (–51.11°C) absolute minimum; minimal icing at sustained minimum of –50°F(–45°C); prevents icing at sustained minimum of –40°F (–40°C); de-ices 0.1 inch (2.5 mm) within 3 |
| Mount Type | Pendant |
| On Screen Display Menu | Yes |
| Auto Gain Control | Yes |
| Day/Night | Yes |
| Heater & Fan | Yes |
Pelco SD429-PRE1-X | Day/Night | On Screen Display Menu | Solid-State Sensors for Internal Temperature, Pressure and Dew Point | On-Screen Alert Modes | Built-in Back Box Memory. Buy Now.
The SD429-PRE1-X from Pelco is a dome system provides ultimate protection of the camera optics and electronics from moisture, corrosive gases, and airborne contaminants. Domes are easily pressurized with dry nitrogen to 8 psig (55 kPa) before or after installation to stabilize the environment inside the system.
Sensors strategically placed in the dome system send an "Alert" message when changes in internal pressure, temperature, or dew point are beyond factory-set acceptable limits. The sensors also allow for instant on-screen display of internal temperature, pressure, and dew point.
Features
- Pressurized to 8 psig (55 kPa)
- Solid-State Sensors for Internal Temperature, Pressure, and Dew Point
- On-Demand Environmental Status Display for Internal Temperature, Pressure, and Dew Point
- On-Screen Alert Modes
- On-Screen Programmable Menus for Pan/Tilt, Camera, and Sensor Alert Settings
- Built-in Back Box Memory
- Integrated Passive UTP Circuit
- 2 Auxiliary Outputs and 7 Alarm Inputs
- Environmental Pendant Style Back Box
- Stainless Steel Construction
- Meets NEMA Type 6P and IP67 Standards
- Compatible with 29X Spectra IV SE Dome Drives
- Built-in Power Line Surge and Limited Lightning Protection
| Condition | New |
|---|---|
| Features | Auto Gain Control, Day/Night, Heater & Fan, On Screen Display Menu, Weather Resistant |
| NDAA Compliance | Yes |
| Brand | Pelco |
| Weatherproof | IP67 |
| Signal System | PAL |
| Lens Size | 29X |
| Camera Signal | Analog |
| Lens Type | Motorized Zoom |
| Durability | Indoor, Weather Resistant |
| Infrared Distance | Non Infrared |
| Resolution | < 1MP |
| Voltage | 24vDC, 24vAC |
| Operating Temperature | Maximum 140°F (60°C) absolute maximum; 122°F (50°C) sustained maximum, Minimum –60°F (–51.11°C) absolute minimum; minimal icing at sustained minimum of –50°F(–45°C); prevents icing at sustained minimum of –40°F (–40°C); de-ices 0.1 inch (2.5 mm) within 3 |
| Mount Type | Pendant |
| On Screen Display Menu | Yes |
| Auto Gain Control | Yes |
| Day/Night | Yes |
| Heater & Fan | Yes |
