Pelco SD436-PB-0 Spectra IV SE 36X Integrated Dome Camera System, Smoked Bubble, NTSC

The SD436-PB-0 from Pelco is a Spectra IV SE 36x Day/Night Indoor Dome Camera, black. Spectra IV SE was designed with ease of installation and ease of maintenance in mind. Each dome system consists of three components: a back box, a dome drive a lower dome. These three system components are interchangeable with other Spectra IV SE dome systems, making retrofitting and application adjustments simple. Also, dome drives and lower domes can be removed and replaced reducing maintenance time. It features a built-in back box memory to store camera and location-specific dome settings, including labels, presets, patterns zones. A passive UTP circuit is located on the door assembly for convenient video transmission through twisted pair wire. For added flexibility, fiber modules can also be attached to the door assembly for transmission over single-mode or multimode fiber.

This indoor camera features the LowLight technology that allows it to compensate for scenes where minimal light is present. It features built-in motion detection and 128x WDR (Wide Dynamic Range) that enables the system to compensate for scenes where dramatic contrasts in lighting are present. The camera's electronic image stabilization digitally reduces blurring of the camera image due to vibration caused by external sources, such as wind and traffic. Auto sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening the edges in the picture. The dome drive features removable and fixed mount bracket only (camera and lens not included).

Spectra IV SE dome systems feature many software enhancements that increase performance and make configuration and operation easy. An internal scheduling clock allows for the scheduling of presets and patterns. Window blanking enables a user to configure up to eight, four-sided, user-defined privacy areas. Password protection prevents unauthorized users from changing system settings. Configurable on-screen compass and tilt display provides positioning information when needed. Intuitive multilingual on-screen menus can be displayed in English, Spanish, Portuguese, Italian, French, German, Russian, Polish, Turkish Czech.

Features

2 Autofocus, High-Resolution Integrated Camera/Optics Packages; Multiple Back Box Models
Day/Night, 540 TVL, 128X Wide Dynamic Range (WDR), Motion Detection, and Electronic Image Stabilization (SD436 Series)
Day/Night, 540 TVL, 128X Wide Dynamic Range (WDR), and Motion Detection (SD429 Series)
Auto tracking
Window Blanking
Camera Title Overlay, 20 User-Definable Characters
Horizontal and Zone Blanking
On-Screen Compass and Tilt Display
Password Protection
Low Lux Noise Reduction
Built-in Surge and Limited Lightning Protection
Sure Focus
Integrated Passive Unshielded Twisted Pair (UTP) Circuit
Internal Scheduling Clock
Ability to Add IP Network Capability by Purchasing Optional TXB-N Module
Built-in Memory Stores Camera/Dome Settings
Single Back Box for Suspended or Hard Ceiling Applications
Requires 5.25-Inch Space Above Ceiling and 3.25 Inches Below
Minimum Ceiling Thickness 0.5-Inch; Maximum 1.75 Inches
Quick Disconnect to Dome Drive
Aluminum Construction
Suitable for Use in Environmental Air Handling Spaces
Integrated Passive UTP

Downloads

SD436-PB-0-Specsheet

Additional Information

Product SKU	SD436-PB-0
Brand	Pelco
Condition	New
NDAA Compliance	Yes
Features	Auto Gain Control, Automatic White Balance, Digital Noise Reduction, Motion Detection Tracking, On Screen Display Menu, Privacy Masking, Weather Resistant, Wide Dynamic Range
Synchronization	Internal/AC line lock, phase adjustable using remote control, V-Sync
Weatherproof	IP66
Video Output	1 Vp-p, 75 ohms
Signal System	NTSC , PAL
Angle of View	57.2° at 3.3 mm wide zoom; 1.7° at 119 mm telephoto zoom
Camera Signal	Analog
Lens Type	Motorized Zoom
Durability	Indoor, Weather Resistant
Automatic White Balance	Automatic with manual override
Auto Gain Control	Automatic/OFF
Scanning System	2:1 Interlace
Image Device	1/4-inch EXview HAD
Infrared Distance	Non Infrared
Resolution	< 1MP
Voltage	24vDC
Sensor Option	1/4" CCD
Image Pixels-Effective	768 (H) X 494 (V)
OSD Menu	English, Spanish, Portuguese, Italian, French, German, Russian, Polish, Turkish, and Czech
Operating Temperature	0° to 50°C (32° to 122°F)
Minimum Scene Illumination	0.55 lux at 1/60 sec (color), 0.018 lux at 1/2 sec (color), 0.0048 lux at 1/2 sec (B-W)
Mount Type	Pendant, Wall
On Screen Display Menu	Yes
Privacy Masking	Yes
Wide Dynamic Range	Yes
Automatic White Balance	Yes
Motion Detection Tracking	Yes
Digital Noise Reduction	Yes