Pelco SD436-PRE0 Spectra IV SE 36x Pressurized PTZ, Tint

Pelco's Pressurized Spectra IV Series dome system provides ultimate protection of the camera optics and electronics from moisture, corrosive gases, and airborne contaminants. Domes are easily pressurized with dry nitrogen to 8 psig (55 kPa) before or after installation to stabilize the environment inside the system. Sensors strategically placed in the dome system send an "Alert" message when changes in internal pressure, temperature, or dew point are beyond factory-set acceptable limits. The sensors also allow for instant on-screen display of internal temperature, pressure, and dew point.

The lower dome features an innovative O-ring seal and a stainless steel V-band to create a reliable pressure seal. The V-band has a unique latching system with one captivated fastener making lower dome installation easy. Accessible on the lower dome trim ring are a Schrader valve for system purging and a pressure relief valve. The Pressurized Spectra IV Series is supplied with a prewired cable with mating connector. The cable includes all wires for system functionality, including power, alarms, auxiliaries, coaxial video, UTP video, and serial control.

Product Features:

Pressurized to 8 psig (55 kPa)
Solid-State Sensors for Internal Temperature, Pressure, and Dew Point
On-Demand Environmental Status Display for Internal Temperature, Pressure, and Dew Point
On-Screen Alert Modes
On-Screen Programmable Menus for Pan/Tilt, Camera, and Sensor Alert Settings
Built-in Back Box Memory
Integrated Passive UTP Circuit
2 Auxiliary Outputs and 7 Alarm Inputs
Environmental Pendant Style Back Box
Stainless Steel Construction
Meets NEMA Type 6P and IP67 Standards
Built-in Power Line Surge and Limited Lightning Protection
36x Optical Zoom, Nitrogen Pressurized, Pendant Mount, Grey Stainless Steel Housing, Smoked Lower Dome, NTSC

Downloads

	Spectra IV SE Operation Manual (Size: 3.7 MB)
	Spectra IV SE Pressurized Spec Sheet (Size: 193.8 KB)
	Spectra IV SE Quick Start Guide (Size: 497.4 KB)

Additional Information

Product SKU	SD436-PRE0
Brand	Pelco
Condition	New
Features	Auto Gain Control, Automatic White Balance, Digital Noise Reduction, Motion Detection Tracking, On Screen Display Menu, Privacy Masking, Weather Resistant, Wide Dynamic Range
Technology	Analog SD / 960H
Resolution	480 - 540
PTZ Class	Modular Speed Domes
Image Sensor	1/4-inch CCD
Housing Options	Nitrogen Pressurized, Stainless Steel (SS)
Signal Format	NTSC (Domestic)
Housing Color	Gray
Voltage	24 VDC, 24 VAC
Bubble Finish	Tint/Smoke
Mounting Position	Pendant (NO Mount)
Video Connection	BNC, UTP
Optical Zoom	36X
Special Features	Auto Tracking, Digital Noise Reduction, Image Flip, Image Stabilization, On-screen Menu, Privacy Masking, Video Motion Detection, Wide Dynamic Range, 360° Endless Pan
Camera Type	Pan/Tilt/Zoom
Mount Options	VESA 400 x 200
Environment	Outdoor (IP65+), Low Temp (<14°F)
Imaging System	Day/Night (No IR)
Signal System	NTSC
Video Output	1 Vpp, 75 Ω
Scanning System	2:1 Interlace
Synchronization	Internal/AC line lock, phase adjustable using remote control, V-Sync
Angle of View	57.2° at 3.3 mm wide zoom, 1.7° at 119 mm telephoto zoom
Automatic White Balance	Automatic / off
S/N Ratio	>50 dB
Weatherproof	IP67
Camera Signal	Analog
Resolution	540 TVL
Sensor Option	1/4" CCD
Lens Type	Motorized Zoom
Lens Size	36X
Infrared Distance	Non Infrared
Durability	Weather Resistant
Mount Type	Pendant
Voltage	24VAC, 24vDC
Electronic Shutter	Automatic (electronic iris) / Manual, 1/2 to 1/30,000
Operating Temperature	140°F (60°C)
Dimensions (W x H)	11.63 x 10.50" (29.50 x 26.70 cm)
Minimum Scene Illumination	Color: 0.55 lux at 1/60 sec and 0.018 lux at 1/2 sec, B&W: 0.00018 lux at 1/2 sec
Image Pixels Total	768 (H) X 494 (V)
Image Device	1/4" EXview HAD
Wide Dynamic Range	Yes
Motion Detection Tracking	Yes
Privacy Masking	Yes
Automatic White Balance	Yes
On Screen Display Menu	Yes
Digital Noise Reduction	Yes