You have no items in your shopping cart.


Product was successfully added to your shopping cart.
  • SD436-PRME0, Pelco PTZ Cameras SD436-PRME0, Pelco PTZ Cameras

Pelco SD436-PRME0 Spectra IV SE 36x Pressurized(MMF) PTZ, Tint

Pelco | SKU: SD436-PRME0 | Model: SD436-PRME0

Product Highlights

Pelco SD436-PRME0 Spectra IV SE 36x Pressurized(MMF) PTZ, Tint

This item is discontinued. Call (866) 440-2288 for Replacement

Pelco's Pressurized Spectra IV Series dome system provides ultimate protection of the camera optics and electronics from moisture, corrosive gases, and airborne contaminants. Domes are easily pressurized with dry nitrogen to 8 psig (55 kPa) before or after installation to stabilize the environment inside the system. Sensors strategically placed in the dome system send an "Alert" message when changes in internal pressure, temperature, or dew point are beyond factory-set acceptable limits. The sensors also allow for instant on-screen display of internal temperature, pressure, and dew point.

The lower dome features an innovative O-ring seal and a stainless steel V-band to create a reliable pressure seal. The V-band has a unique latching system with one captivated fastener making lower dome installation easy. Accessible on the lower dome trim ring are a Schrader valve for system purging and a pressure relief valve. The Pressurized Spectra IV Series is supplied with a prewired cable with mating connector. The cable includes all wires for system functionality, including power, alarms, auxiliaries, coaxial video, UTP video, and serial control.

Product Features:

  • MMF - Multi Mode Fiber Optic Feedthrough
  • Pressurized to 8 psig (55 kPa)
  • Solid-State Sensors for Internal Temperature, Pressure, and Dew Point
  • On-Demand Environmental Status Display for Internal Temperature, Pressure, and Dew Point
  • On-Screen Alert Modes
  • On-Screen Programmable Menus for Pan/Tilt, Camera, and Sensor Alert Settings
  • Built-in Back Box Memory
  • Integrated Passive UTP Circuit
  • 2 Auxiliary Outputs and 7 Alarm Inputs
  • Environmental Pendant Style Back Box
  • Stainless Steel Construction
  • Meets NEMA Type 6P and IP67 Standards
  • Built-in Power Line Surge and Limited Lightning Protection
  • 36x Optical Zoom, Nitrogen Pressurized, Pendant Mount, Grey Stainless Steel Housing, Smoked Lower Dome, Multi Mode Fiber Optic Feedthrough, NTSC

Additional Information

Product SKU SD436-PRME0
Brand Pelco
Condition New
Features Auto Gain Control, Digital Noise Reduction, Motion Detection Tracking, On Screen Display Menu, Privacy Masking, Weather Resistant, Wide Dynamic Range
Sensor Option 1/4" CCD
Signal System NTSC
Video Output 1 Vpp, 75 Ω
Weatherproof IP67
Synchronization Internal/AC line lock, phase adjustable using remote control, V-Sync
Angle of View 57.2° at 3.3 mm wide zoom, 1.7° at 119 mm telephoto zoom
Scanning System 2:1 Interlace
Lens Type Motorized Zoom
Auto Gain Control Automatic / off
Camera Signal Analog
Image Pixels-Effective 768 (H) X 494 (V)
Lens Size 36X
Infrared Distance Non Infrared
Durability Weather Resistant
S/N Ratio >50 dB
Mount Type Pendant
Voltage 24VAC, 24vDC
Electronic Shutter Automatic (electronic iris) / Manual, 1/2 to 1/30,000
Image Device 1/4" EXview HAD
Operating Temperature 140°F (60°C)
Minimum Scene Illumination Color: 0.55 lux at 1/60 sec and 0.018 lux at 1/2 sec, B&W: 0.00018 lux at 1/2 sec
Resolution 540 TVL
Wide Dynamic Range Yes
Motion Detection Tracking Yes
Privacy Masking Yes
On Screen Display Menu Yes
Digital Noise Reduction Yes
  • (1) - Spectra IV SE Pressurized High Speed Dome System (Back Box, Dome Drive, Lower Dome)
  • Warranty - 3 Years