Optex BX-80NR Battery Operated Barrier Outdoor PIR
Product Highlights
This item is discontinued. Replacement: BXS-RAM
Optex BX-80NR | Scene: Outdoor | Common causes of false alarms such as RFI and unwanted sunlight can be greatly reduced by patented Double | Slim and stylish. Buy Now.
The Optex BX-80NR is a 5 ft. x 80 ft. battery operated barrier outdoor passive infrared (40 ft. each side of detector) with Piezo sounder. It is designed to protect the immediate perimeter of the building. It is developed for the purpose of early warning, i.e. before an intruder breaks into the premises.
When a general-purpose mechanical security system is installed, detectors are usually located inside a building. In order to increase the effectiveness of such a security system, Optex recommends not only securing the inside of the building but also adding protection to the outside areas. By adding BX-80NR, it detects intruders before entry. This invisible barrier offers the first line of defense to a property's boundary.
FEATURES:
- Optex's advanced PIR technology creates a narrow, 24m long detection area that protects wide horizontal areas, such as a building's perimeter.
- Patented Double Conductive Shielding Technology helps to reduce false alarms caused by car headlights and reflects sunlight in particular.
- The detection range of the BX-80NR can be adjusted to avoid detecting unwanted objects.
- The BX-80NR uses advanced temperature compensation to automatically increase the detector's sensitivity under high temperature conditions, especially where the background temperature ranges from 35-37 degree C, close to that of the human body.
- The BX-80NR only triggers alarms when both upper and lower detection layers detect movements.
- The BX-80NR is a battery operated model and therefore requires no complicated wiring. It saves installation time & cost.
- The BX-80NR with flexible features can be added on to any wireless system which has already been installed. In addition, this unit is effective with transmitters and receivers from all manufacturers.
- By using for the attached battery lead, the battery power from transmitter can be shared with BX-80NR and also low battery signal can be monitored by control panel.
Downloads
Condition | New |
---|---|
NDAA Compliance | No |
Brand | Optex |
Home Control | Wi-Fi |
Type | Wireless |
Scene | Outdoor |
- 1 x BX-80NR
- 2 x Screw
- 2 x Battery Lead
- 1 x Alarm Cable
- 1 x 006 Connector Cable
- 1 x Sponge Pad
- 2 x Velcro Tape
- 1 x Manual
- 2-Year Limited Warranty
Optex BX-80NR | Scene: Outdoor | Common causes of false alarms such as RFI and unwanted sunlight can be greatly reduced by patented Double | Slim and stylish. Buy Now.
The Optex BX-80NR is a 5 ft. x 80 ft. battery operated barrier outdoor passive infrared (40 ft. each side of detector) with Piezo sounder. It is designed to protect the immediate perimeter of the building. It is developed for the purpose of early warning, i.e. before an intruder breaks into the premises.
When a general-purpose mechanical security system is installed, detectors are usually located inside a building. In order to increase the effectiveness of such a security system, Optex recommends not only securing the inside of the building but also adding protection to the outside areas. By adding BX-80NR, it detects intruders before entry. This invisible barrier offers the first line of defense to a property's boundary.
FEATURES:
- Optex's advanced PIR technology creates a narrow, 24m long detection area that protects wide horizontal areas, such as a building's perimeter.
- Patented Double Conductive Shielding Technology helps to reduce false alarms caused by car headlights and reflects sunlight in particular.
- The detection range of the BX-80NR can be adjusted to avoid detecting unwanted objects.
- The BX-80NR uses advanced temperature compensation to automatically increase the detector's sensitivity under high temperature conditions, especially where the background temperature ranges from 35-37 degree C, close to that of the human body.
- The BX-80NR only triggers alarms when both upper and lower detection layers detect movements.
- The BX-80NR is a battery operated model and therefore requires no complicated wiring. It saves installation time & cost.
- The BX-80NR with flexible features can be added on to any wireless system which has already been installed. In addition, this unit is effective with transmitters and receivers from all manufacturers.
- By using for the attached battery lead, the battery power from transmitter can be shared with BX-80NR and also low battery signal can be monitored by control panel.
Downloads
Condition | New |
---|---|
NDAA Compliance | No |
Brand | Optex |
Home Control | Wi-Fi |
Type | Wireless |
Scene | Outdoor |
- 1 x BX-80NR
- 2 x Screw
- 2 x Battery Lead
- 1 x Alarm Cable
- 1 x 006 Connector Cable
- 1 x Sponge Pad
- 2 x Velcro Tape
- 1 x Manual
- 2-Year Limited Warranty