Macurco RD-12-W 120V Refrigerant Fixed Gas Detector
Product Highlights
This item is discontinued. Call (866) 440-2288 for Replacement
The Macurco RD-12 is a dual relay Refrigerant (REF) detector, controller and transducer. The RD-12 has select-able 4-20 mA output, buzzer and digital display options. It is an electronic detection system used to measure the concentration of refrigerant gas and provide feedback and automatic exhaust fan control to help reduce refrigerant gas concentrations in industrial refrigeration, cold storage or other commercial applications. The RD-12 is a low level meter capable of detecting several refrigerants including R-22, R-134A, R-404A, R-407C and R-410A.
Select-able Options
- Fan relay actuation: select-able at 100 (default), 150, 200, 250, 300, 350ppm
- Output: Fan relay, Alarm relay and 4-20mA current loop
- Controls: Digital display (0-1,000 ppm), buzzer, fan delay, fan minimum run-time
Installation
- Mounts on a standard 4" x 4" electrical box
- 5 A SPDT fan relay controls valves, louvers or exhaust fans
- 0.5 A N.O. or N.C alarm relay connects to warning devices or control panels
- 4-20mA current loop - compatible with the Macurco DVP-120 Control Panel
- Factory calibrated
Other Features
- Supervised system design: detector problem will cause the fan & alarm relay to activate
- Long life solid-state sensor
- ETL Listed to UL 61010-1, CAN/CSA C22.2 No 61010-1
- White housing
Location
A Macurco RD-12 is normally mounted low in the room on a wall or column one foot above the floor in a central area where air movement is generally good. Use the same spacing as for smoke detectors, 30-foot centers, 900 square feet per detector (84 sq. meters). The coverage depends on air movement within the room or facility. Extra detectors may be needed near any areas where people work or where the air is stagnant. The RD-12 mounts on a 4x4 electrical box supplied by the contractor. Do not install the RD-6 inside another box unless it has good air flow through it. Do NOT mount the RD-12 where the normal ambient temperature is below 0F or exceeds 125F (below -18C or above 52C).
Downloads
| Condition | New |
|---|---|
| NDAA Compliance | No |
| Brand | Macurco |
| Home Control | Wi-Fi |
| Type | Hardwired |
| Scene | Indoor |
- (1) Refrigerant Fixed Gas Detector Controller & Transducer
- Product Documentation
- Two Year Warranty
The Macurco RD-12 is a dual relay Refrigerant (REF) detector, controller and transducer. The RD-12 has select-able 4-20 mA output, buzzer and digital display options. It is an electronic detection system used to measure the concentration of refrigerant gas and provide feedback and automatic exhaust fan control to help reduce refrigerant gas concentrations in industrial refrigeration, cold storage or other commercial applications. The RD-12 is a low level meter capable of detecting several refrigerants including R-22, R-134A, R-404A, R-407C and R-410A.
Select-able Options
- Fan relay actuation: select-able at 100 (default), 150, 200, 250, 300, 350ppm
- Output: Fan relay, Alarm relay and 4-20mA current loop
- Controls: Digital display (0-1,000 ppm), buzzer, fan delay, fan minimum run-time
Installation
- Mounts on a standard 4" x 4" electrical box
- 5 A SPDT fan relay controls valves, louvers or exhaust fans
- 0.5 A N.O. or N.C alarm relay connects to warning devices or control panels
- 4-20mA current loop - compatible with the Macurco DVP-120 Control Panel
- Factory calibrated
Other Features
- Supervised system design: detector problem will cause the fan & alarm relay to activate
- Long life solid-state sensor
- ETL Listed to UL 61010-1, CAN/CSA C22.2 No 61010-1
- White housing
Location
A Macurco RD-12 is normally mounted low in the room on a wall or column one foot above the floor in a central area where air movement is generally good. Use the same spacing as for smoke detectors, 30-foot centers, 900 square feet per detector (84 sq. meters). The coverage depends on air movement within the room or facility. Extra detectors may be needed near any areas where people work or where the air is stagnant. The RD-12 mounts on a 4x4 electrical box supplied by the contractor. Do not install the RD-6 inside another box unless it has good air flow through it. Do NOT mount the RD-12 where the normal ambient temperature is below 0F or exceeds 125F (below -18C or above 52C).
Downloads
| Condition | New |
|---|---|
| NDAA Compliance | No |
| Brand | Macurco |
| Home Control | Wi-Fi |
| Type | Hardwired |
| Scene | Indoor |
- (1) Refrigerant Fixed Gas Detector Controller & Transducer
- Product Documentation
- Two Year Warranty
Customers also viewed
Check items to add to the cart or select all
