Bosch D273THR Four-Wire Smoke/Heat Detector with Trouble Relay
Product Highlights
This item is discontinued. Call (866) 440-2288 for Replacement
D273THR Four-Wire Smoke/Heat Detector with Trouble Relay. Four-wire smoke detector with a 135°F (57°C) heat sensor and a trouble relay.
This detector model is UL Listed and works with commercial fire protective signaling and household fire warning systems. Detects smoke particles produced during wood, paper, and fabric combustion. This detector model use an infrared (IR) LED light source and a silicon photodiode to measure light in a chamber. A fine screen covers the chamber to deter insects and reduce dust accumulation and nuisance alarms. During a fire, smoke particles reflect light onto the photodiode. When the photodiode measurements exceed the alarm threshold, the detector signals an alarm condition. After the alarm condition clears, interrupt power at the control panel to reset the detector. When a D132B Reversing Relay Module is used, the LED does not latch on alarm.
- 12VDC or 24VDC input
- Designed for commercial or residential use
- Four-wire application
- Light-emitting diodes (LEDs) indicate the status of the chamber, power, and alarm
- Removable terminal block to simplify wiring connections
Downloads
| Condition | New |
|---|---|
| NDAA Compliance | No |
| Brand | Bosch |
| Home Control | Wi-Fi |
| Type | Hardwired |
| Scene | Indoor |
D273THR Four-Wire Smoke/Heat Detector with Trouble Relay. Four-wire smoke detector with a 135°F (57°C) heat sensor and a trouble relay.
This detector model is UL Listed and works with commercial fire protective signaling and household fire warning systems. Detects smoke particles produced during wood, paper, and fabric combustion. This detector model use an infrared (IR) LED light source and a silicon photodiode to measure light in a chamber. A fine screen covers the chamber to deter insects and reduce dust accumulation and nuisance alarms. During a fire, smoke particles reflect light onto the photodiode. When the photodiode measurements exceed the alarm threshold, the detector signals an alarm condition. After the alarm condition clears, interrupt power at the control panel to reset the detector. When a D132B Reversing Relay Module is used, the LED does not latch on alarm.
- 12VDC or 24VDC input
- Designed for commercial or residential use
- Four-wire application
- Light-emitting diodes (LEDs) indicate the status of the chamber, power, and alarm
- Removable terminal block to simplify wiring connections
Downloads
| Condition | New |
|---|---|
| NDAA Compliance | No |
| Brand | Bosch |
| Home Control | Wi-Fi |
| Type | Hardwired |
| Scene | Indoor |
Customers also viewed
Check items to add to the cart or select all
