ETS SM1-ULE Surface Mount Unidirectional Microphone
Product Highlights
The SM1-ULE is a high performance, flush mount, Uni-directional, a pre-amplified microphone for use where side noise must be reduced. Simply mount the SM1-ULE in the direction of interest. Built in the limiter circuit automatically lowers the output level during loud sound intervals. Selectable lo-cut and hi-cut filters significantly reduce background noise. ABS enclosure mounts on any surface Connect directly to our switcher/ mixer/amplifiers or use one of our many interface products to make fast and clean connections to DVRs or remote monitoring equipment.
- Unidirectional 25' pickup pattern with reduced (-6db) sensitivity on all sides
- Low noise MOSFET pre-amplifiers VERIFACT B-6
- 500Hz-13Khz Frequency response
- Jumper selectable hi-cut/lo-cut filters limit frequency response to up to 900 to 6Khz significantly reducing background noise
- Jumper selectable volume range: "Line level" (0db) or "Microphone level" (-30db)
- Adjustable gain in both volume ranges
- Peak Limiter: .5sec response time
- 100 Ohm unbalanced output
- 3 position Euro-style connector makes cable termination fast and clean
- Power: 12 to 24VDC @ 10mA
- On-board voltage regulator and RFI filtering
- Similar in appearance to a fire suppression sprinkler head
- ABS enclosure Mounts on any surface
Downloads
Condition | New |
---|---|
Brand | ETS |
The SM1-ULE is a high performance, flush mount, Uni-directional, a pre-amplified microphone for use where side noise must be reduced. Simply mount the SM1-ULE in the direction of interest. Built in the limiter circuit automatically lowers the output level during loud sound intervals. Selectable lo-cut and hi-cut filters significantly reduce background noise. ABS enclosure mounts on any surface Connect directly to our switcher/ mixer/amplifiers or use one of our many interface products to make fast and clean connections to DVRs or remote monitoring equipment.
- Unidirectional 25' pickup pattern with reduced (-6db) sensitivity on all sides
- Low noise MOSFET pre-amplifiers VERIFACT B-6
- 500Hz-13Khz Frequency response
- Jumper selectable hi-cut/lo-cut filters limit frequency response to up to 900 to 6Khz significantly reducing background noise
- Jumper selectable volume range: "Line level" (0db) or "Microphone level" (-30db)
- Adjustable gain in both volume ranges
- Peak Limiter: .5sec response time
- 100 Ohm unbalanced output
- 3 position Euro-style connector makes cable termination fast and clean
- Power: 12 to 24VDC @ 10mA
- On-board voltage regulator and RFI filtering
- Similar in appearance to a fire suppression sprinkler head
- ABS enclosure Mounts on any surface
Downloads
Condition | New |
---|---|
Brand | ETS |