SM5-EA Single Zone Audio Monitoring Kit
ETS
|
SKU: SM5-EA-CNT
|
Model: SM5-EA
Product Highlights
SM5-EA Single Zone Audio Monitoring Kit
This item is discontinued. Replacement: SM5-EA
The SM5-EA is a single zone audio surveillance kit for use with powered over Ethernet IP cameras. In line adapter for tapping power off Ethernet powered IP cameras to supply power to the SM1 microphone. Adapter "breakout box" includes terminations for the microphone. Can be connected to "microphone" or "line" level inputs of POE IP cameras
SM1 Microphone Features
- Omni-directional Electret element
- 25' range in all directions
- Frequency response: 200-16Khz
- Low noise MOSFET pre-amplifier
- Line level, unbalanced output
- Adjustable gain
- Treble boost circuit. Select-able on/off
- Limiter circuit / Select-able on/off
- 3 position Euro-style connector makes cable termination fast and clean
- Flush mountable. Can be mounted on a single gang electrical box
- Power: 12 VDC @ 10mA
SMEA-1 Interface Features
- RCA or 3.5mm audio output jack
- Transformer isolated audio output
- Adjustable audio output level
- RJ45 CAT5 in/out jacks
- Modes A and B of IEE802.3af supported
- A/B mode switch select-able
- Straight through CAT5 connections (no crossover)
- Voltage input: 48-60Vdc
- 15vdc internal Voltage regulator supplies power to microphone
- Current consumption: 15ma with microphone connected
- Euro-style connector makes cable termination of microphone fast and clean
- Led power indicator
- Auto polarity protected & fused
- Dimensions: L 3.3 x W 2.0 x H 1.6
Downloads
| Condition | New |
|---|---|
| Brand | ETS |
| NDAA Compliance | No |
| Housing | Single Gang Faceplate |
| Zones | 1-Zone |
| Coverage | 25' x 25' |
| # of Areas | 1 |
- (1) SM1 Pre-amplified microphone
- (1) SMEA-1 interface
- (1) 3' RCA or 3.5mm Patch cable
- (1) Warning label
- (1) Set of SM1 mounting screws
- (1) Installation Instructions
The SM5-EA is a single zone audio surveillance kit for use with powered over Ethernet IP cameras. In line adapter for tapping power off Ethernet powered IP cameras to supply power to the SM1 microphone. Adapter "breakout box" includes terminations for the microphone. Can be connected to "microphone" or "line" level inputs of POE IP cameras
SM1 Microphone Features
- Omni-directional Electret element
- 25' range in all directions
- Frequency response: 200-16Khz
- Low noise MOSFET pre-amplifier
- Line level, unbalanced output
- Adjustable gain
- Treble boost circuit. Select-able on/off
- Limiter circuit / Select-able on/off
- 3 position Euro-style connector makes cable termination fast and clean
- Flush mountable. Can be mounted on a single gang electrical box
- Power: 12 VDC @ 10mA
SMEA-1 Interface Features
- RCA or 3.5mm audio output jack
- Transformer isolated audio output
- Adjustable audio output level
- RJ45 CAT5 in/out jacks
- Modes A and B of IEE802.3af supported
- A/B mode switch select-able
- Straight through CAT5 connections (no crossover)
- Voltage input: 48-60Vdc
- 15vdc internal Voltage regulator supplies power to microphone
- Current consumption: 15ma with microphone connected
- Euro-style connector makes cable termination of microphone fast and clean
- Led power indicator
- Auto polarity protected & fused
- Dimensions: L 3.3 x W 2.0 x H 1.6
Downloads
| Condition | New |
|---|---|
| Brand | ETS |
| NDAA Compliance | No |
| Housing | Single Gang Faceplate |
| Zones | 1-Zone |
| Coverage | 25' x 25' |
| # of Areas | 1 |
- (1) SM1 Pre-amplified microphone
- (1) SMEA-1 interface
- (1) 3' RCA or 3.5mm Patch cable
- (1) Warning label
- (1) Set of SM1 mounting screws
- (1) Installation Instructions
