Altronix T1MKAIV Access and Power Integration Kit - Trove1 with eFlow4NB, ACM4 with Original TM1
Product Highlights
Altronix T1MK1F4 kit consists of Trove1 enclosure and TM1 Mercury/Altronix backplane with 12VDC or 24VDC (factory set at 24VDC) @ 4A power supply/charger, 12VDC voltage regulator and four (4) fuse protected output access control module. This kit also accommodate various combinations of Mercury/Lenel* boards for up to four (4) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.
Features
- Accommodates the following Mercury controllers: EP1502, LP1502, MR52, MR16IN, MR16OUT, EP1501, LP1501, MR51e, MR62e, MR50, EP2500, LP2500, MUX8
- Convenient knockout configuration: Single 1.5" diameter knockout located top center of enclosure, Nine (9) double knockouts (1" and 0.75")
- 16 AWG galvanized steel backplane simplifies board layout and wire management
- Filtered and electronically regulated outputs
- Thermal and short circuit protection with auto reset
- AC input and DC output LED indicators
- Supervision AC Fail, Low Battery and Battery Presence, Low power shutdown
- Built-in charger for sealed lead acid or gel type batteries
- Instantaneous transfer to stand-by batteries
- CE European Conformity
- Enclosure accommodates up to two (2) 12VDC/7AH batteries
Downloads
Condition | New |
---|---|
Brand | Altronix |
Output Type | DC |
Fire Alarm Interface | No |
Certifications | CE, cUL, UL |
Output Protection | Fuse |
Input Voltage | 120VAC |
Battery Charging | No |
Altronix T1MK1F4 kit consists of Trove1 enclosure and TM1 Mercury/Altronix backplane with 12VDC or 24VDC (factory set at 24VDC) @ 4A power supply/charger, 12VDC voltage regulator and four (4) fuse protected output access control module. This kit also accommodate various combinations of Mercury/Lenel* boards for up to four (4) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.
Features
- Accommodates the following Mercury controllers: EP1502, LP1502, MR52, MR16IN, MR16OUT, EP1501, LP1501, MR51e, MR62e, MR50, EP2500, LP2500, MUX8
- Convenient knockout configuration: Single 1.5" diameter knockout located top center of enclosure, Nine (9) double knockouts (1" and 0.75")
- 16 AWG galvanized steel backplane simplifies board layout and wire management
- Filtered and electronically regulated outputs
- Thermal and short circuit protection with auto reset
- AC input and DC output LED indicators
- Supervision AC Fail, Low Battery and Battery Presence, Low power shutdown
- Built-in charger for sealed lead acid or gel type batteries
- Instantaneous transfer to stand-by batteries
- CE European Conformity
- Enclosure accommodates up to two (2) 12VDC/7AH batteries
Downloads
Condition | New |
---|---|
Brand | Altronix |
Output Type | DC |
Fire Alarm Interface | No |
Certifications | CE, cUL, UL |
Output Protection | Fuse |
Input Voltage | 120VAC |
Battery Charging | No |