IP Over Coax
InVid INVID-IPOVERCOAX IP Over Coax Passive Converters
The INVID-IPOVERCOAX from InVid is a IP over coax passive converters, includes INVID-IPOVERCOAX-RX &...
Axis T8640 PoE+ over Coax Adapter Kit
AXIS T8640 enables camera installers to keep the legacy coax cabling when converting an analog system to digital. It delivers standard PoE and centrally-sourced power with no new cables required. AXIS T8640 is an ideal choice for installation of network cameras where coax cables are already...
Interlogix POC252-1CX-1P Power over Coax (Camera End) Media Convertor
IP power over coax (camera end) media convertor with 1-port tp PoE-at. The IFS Power over Coax Media Converters from Interlogix are designed to transmit both Ethernet data and power transmission over coax cable up to 3,281 ft. (1Km). This solution provides a cost-effective way to reduce...
NVT NV-ET1801 TBus 1-Port PoE+ Transmitter
The NVT Model NV-ET1801 TBus PoE+ Transmitter is a compact bus-architected media converter that delivers 10/100 BaseT Ethernet and PoE+ power via coax, UTP or 2-Wire or Shielded Twisted Pair cable. These transmitters are extremely simple to use, with no IP or MAC addressing required. Status LEDs...
Axis T8642 PoE+ over Coax Device Unit
AXIS T8640 enables camera installers to keep the legacy coax cabling when converting an analog system to digital. It delivers standard PoE and centrally-sourced power with no new cables required. The device unit receives power from the coax and delivers up to full PoE+ power to the network camera....
Axis T8641 PoE+ over Coax Base Unit
AXIS T8640 enables camera installers to keep the legacy coax cabling when converting an analog system to digital. It delivers standard PoE and centrally-sourced power with no new cables required. The base unit receives PoE power and transmits it down the coax. (T8642 Device Unit needed) Product...
Interlogix POC252-1CXP-1T Power over Coax (Head End) Media Convertor
The IFS Power over Coax Media Converters from Interlogix are designed to transmit both Ethernet data and power transmission over coax cable up to 3,281 ft. (1Km). This solution provides a cost-effective way to reduce installation costs and increase ROI by utilizing existing coax to migrate an...
NVT NV-EC1701-K2H Ethernet/PoE to Coax Kit
The NVT NV-EC1701-K2H Ethernet & PoE over Coax Kit consists of (3) NV-EC1701 Ethernet over Coax (EoC) Transceivers & (1) NV-PS56-90W Power Supply with IEC Line cord.The NVT NV-EC1701 Ethernet over Coax (EoC) Transceiver is a compact media converter that allows 10/100 BaseT Ethernet and PoE+ power...$1,058.59
NVT NV-EC-04 EC4 Coaxial to 4-Port CAT5 Cluster Switch
The EC4 media converters support the IP end points leveraging the CLEER or EC10 switches. In addition, the EC-Link can be easily converted to become an Ethernet extender, with an EC-Link at the base unit and an additional media converter - either another EC-Link or EC4 - at the other end. If...
NVT NV-ECLK-PLS PoE over Coax Extender
The NVT Phybridge EC extender solution is designed to supercharge the downlink ports of a standard Ethernet switch delivering 10/100Mbps symmetrical (full duplex) and PoE over Coax infrastructure with distances up to 4,000ft (1,220m). That’s 12X the reach of standard Ethernet switches, thus...
Keep in Touch
Be sure to follow us on social media for exclusives!
