Altronix PACE1PTM Long Range Ethernet over UTP/CAT5e Transceiver

Long Range Ethernet over UTP/CAT5e Transceiver. Transmits IP video/data over single twisted pair (UTP) up to 150m or CAT5e up to 500m @ 100mbps full duplex and supports PoE (IEEE 802.3af) or PoE+ (IEEE 802.3at). Compatible with Pace receivers. UL/cUL Listed (UL60950-1). CE and C-Tick Approved.

The Pace1PTM is a long range Ethernet transceiver designed for use with Pace1PRM, Pace4PRM, Pace8PRM and Pace16PRM receivers. They transmit data at 100mbps full duplex and power via a single twisted pair (UTP) (when paired with Pace1PRM) or Cat5e or higher cable in a PoE(+) compliant format. The Pace1PTM will not deliver power to non compliant devices, thus avoiding damage to improperly connected non-PoE cameras/devices. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) (when paired with Pace1PRM) or structured cable.

Applications:

Retrofit digital IP cameras in an analog CCTV CAT5 or UTP installations.

Extend Network link distance in an industrial environment.

Works with Megapixel, HD720, HD1080 and VGA (SD) cameras. With proper head end equipment.

• UL/CUL Listed for Information
• Technology Equipment (UL 60950-1)
• PoE (15W) IEEE 802.3af compliant or PoE+ (30W) IEEE 802.3at compliant from Pace1PRM, Pace4PRM, Pace8PRM, or Pace16PRM
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5e or a single twisted pair UTP.
• Speed: 10/100BaseT, half/full duplex, auto negotiation
• PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1PTM
• Throughput is rated to pass 100mbps of data