Altronix Pace1ST IP and PoE+ Mini Transceiver

Pace1ST is a long range Ethernet transceiver designed for use with Pace1PRM, Pace4PRM, Pace8PRM and Pace16PRM receivers. They transmit data at 100mbps full duplex and power via Cat5e or higher cable in a PoE(+) compliant format. The Pace1ST will not deliver power to non compliant devices, thus avoiding damage to improperly connected non-PoE cameras/devices. The receiver passes the PoE(+) compliant power over the cable to the Pace1ST transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m.

Applications

• Retrofit digital IP cameras in an analog CCTV CAT5e installations
• Works with IP Megapixel and non Megapixel cameras.
• Extend Network link distance in an industrial environment over 610m.

Input

• PoE (15W) IEEE 802.3af compliant or PoE+ (30W) IEEE 802.3at compliant from Pace1PRM, Pace4PRM, Pace8PRM, or Pace16PRM.

Ethernet

• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5e or a single twisted pair UTP.
• Distance: up to 500m.
• Speed: 10/100BaseT, half/full duplex, auto negotiation. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1ST.
• Throughput is rated to pass 100mbps of data.

CAT5e or Higher:

• Distance: up to 500m @ 100mbps.

LED Indicators

• Green - PoE ON (by respective RJ45 jack).
• Yellow and Green LED IP Link status, 10/100Base-T/active.

Environmental

• Operating Temperature: For 15W -40 F to 167 F (-40 C to 75 C). For 30W -40 F to 149F (-40 C to 65 C).
• Storage Temperature: -40 F to 167 F (-40 C to 75 C).
• Humidity: 20 to 85%, non-condensing.
• Operating Altitude: - 1000 to 6,561.679 ft. (- 304.8 to 2000m).

Functions

• Auto detection and protection of legacy non-PoE cameras/devices.