Comnet CNFE2002M1APoE/M 1 Fiber 2 Channel 100 Mbps Media Converter
Product Highlights
2TX TO 1 FX Small Size 100Mbps Media Converter (A), ST Connector, AC/DC Power, mm, 1 fiber, 48V POE, Power Supply Included. 30w output.
The ComNet Ethernet CNFE2002M1APoE/M media converter is two-channel Ethernet electrical to optical media converter. This auto-negotiating device accept two 10/100 Mbps electrical inputs and convert this to a single 100 Mbps optical output. This media converter is multimode one fiber ST optical connector. The ComNet exclusive Demux feature allows for port isolation, replicating two media converters over one fiber. The ComNet exclusive Mux feature prevents network video flooding of multicast traffic with DIP switch selection of the fiber port as a dedicated uplink path. The CNFE2002M1APoE/M can be powered by wide range AC or DC input while the CNFE2002M1APoE/M units meet the 802.3at standard and provide 30 watts of PoE+ power.
- 30W PoE+ on ports 1 and 2
- 10/100 Mbps Ethernet
- 2 × 10/100 BASE-T/TX electrical ports
- 100 BASE-FX optical port
- Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
- Distances up to: 3 km (2 mi) Multimode
- ST optical connector
- 1 fiber design
- No in-field optical adjustments required
- Full size units feature a contact closure output for remote side link failure detection
- Standard size is hot-swappable rack module
- Standard size is interchangeable between stand-alone or rack mount use – ComFit
Downloads
| Condition | New |
|---|---|
| Brand | Comnet |
| Format | Multi-Mode |
| Data Rate | 10/100 Mbps |
| Connection Type | ST |
| Voltage | 48-56VDC |
2TX TO 1 FX Small Size 100Mbps Media Converter (A), ST Connector, AC/DC Power, mm, 1 fiber, 48V POE, Power Supply Included. 30w output.
The ComNet Ethernet CNFE2002M1APoE/M media converter is two-channel Ethernet electrical to optical media converter. This auto-negotiating device accept two 10/100 Mbps electrical inputs and convert this to a single 100 Mbps optical output. This media converter is multimode one fiber ST optical connector. The ComNet exclusive Demux feature allows for port isolation, replicating two media converters over one fiber. The ComNet exclusive Mux feature prevents network video flooding of multicast traffic with DIP switch selection of the fiber port as a dedicated uplink path. The CNFE2002M1APoE/M can be powered by wide range AC or DC input while the CNFE2002M1APoE/M units meet the 802.3at standard and provide 30 watts of PoE+ power.
- 30W PoE+ on ports 1 and 2
- 10/100 Mbps Ethernet
- 2 × 10/100 BASE-T/TX electrical ports
- 100 BASE-FX optical port
- Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
- Distances up to: 3 km (2 mi) Multimode
- ST optical connector
- 1 fiber design
- No in-field optical adjustments required
- Full size units feature a contact closure output for remote side link failure detection
- Standard size is hot-swappable rack module
- Standard size is interchangeable between stand-alone or rack mount use – ComFit
Downloads
| Condition | New |
|---|---|
| Brand | Comnet |
| Format | Multi-Mode |
| Data Rate | 10/100 Mbps |
| Connection Type | ST |
| Voltage | 48-56VDC |
Customers also viewed
Check items to add to the cart or select all
