Loading...

NVT NV-4PS13-PVD 4 Channel Power Supply Passive Receiver Hub

NVT   |   SKU: NV-4PS13-PVD   |   Model: NV-4PS13-PVD

Product Highlights

NVT NV-4PS13-PVD 4 Channel Power Supply Passive Receiver Hub
Qty:
$444.00
Add to Quote

Usually ships within 24 hours

  • Free Lifetime Support
  • Free Warranty & Repair Service
  • Call for Bulk Pricing
Express Checkout:

The 4-channel NV-4PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel. Use with NVT's PVD(tm) transceivers for cable runs under 750ft (225m). A built-in passive receiver hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display load /no-load, miswires, or fault conditions at a glance. Automatic-reset fault protection, transient protection, and ground loop free individually floating outputs.

  • Provides Class 2 SELV camera power while receiving video transmission and delivering P/T/Z telemetry all over a single 4-pair Cat5e cable
  • Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B
  • Independently selectable 24VAC-OFF-28VAC with 1 Amp per channel
  • Automatic-reset fault protection; transient protection
  • Individually floating outputs ensure total ground-loop immunity
  • Diagnostic LEDs show load/no load, miswires, and overload conditions
  • Use with the NV-216A-PV, NV-218A-PVD or the NV-226J-PV transceiver at the camera
  • Power cameras via UTP over significant distances (see Power Distance Calculator)
  • 1U high x 8" deep wall, desk or desk rack-mountable
  • Limited lifetime warranty

Downloads

pdf
(Size: 465.4 KB)
Condition New
Brand NVT
Balun Type Receiver Hub
Channels 4
Features Data, Power
Type Passive
Input Voltage 115 VAC, 230 VAC
Rack Mountable No
Integral Camera Power With Power
Channels 4
Connection Type BNC, RJ-45
Form Stand-Alone

The 4-channel NV-4PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel. Use with NVT's PVD(tm) transceivers for cable runs under 750ft (225m). A built-in passive receiver hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display load /no-load, miswires, or fault conditions at a glance. Automatic-reset fault protection, transient protection, and ground loop free individually floating outputs.

  • Provides Class 2 SELV camera power while receiving video transmission and delivering P/T/Z telemetry all over a single 4-pair Cat5e cable
  • Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B
  • Independently selectable 24VAC-OFF-28VAC with 1 Amp per channel
  • Automatic-reset fault protection; transient protection
  • Individually floating outputs ensure total ground-loop immunity
  • Diagnostic LEDs show load/no load, miswires, and overload conditions
  • Use with the NV-216A-PV, NV-218A-PVD or the NV-226J-PV transceiver at the camera
  • Power cameras via UTP over significant distances (see Power Distance Calculator)
  • 1U high x 8" deep wall, desk or desk rack-mountable
  • Limited lifetime warranty

Downloads

pdf
(Size: 465.4 KB)
Condition New
Brand NVT
Balun Type Receiver Hub
Channels 4
Features Data, Power
Type Passive
Input Voltage 115 VAC, 230 VAC
Rack Mountable No
Integral Camera Power With Power
Channels 4
Connection Type BNC, RJ-45
Form Stand-Alone

Customers also viewed

Check items to add to the cart or select all