Altronix HubSat4D 4 Channel Passive UTP Transceiver
Product Highlights
Altronix HubSat4D passive UTP transceiver hub with integral camera power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 4 camera channels in a wall mount enclosure. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv or HubWayDv video balun/combiners. In addition, the unit features 24VAC or 28VAC PTC protected outputs and surge suppression. Optionally, the HubSat4D can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay, HubWayLD or HubWayLDH passive (non-amplified) and active (amplified) UTP transceiver hubs. In addition, the HubSat4D powers these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.
Input:
- 115 VAC 50/60 Hz, 1.25 Amp.
- Primary fuse is rated at 3.5 Amp/250 V.
Video:
- Four (4) channels of video over twisted-pair up to 750 ft.
- Four (4) 75 Ohm video outputs.
Data:
- RS422/RS485 data inputs.
Power:
- Individually selectable 24 VAC or 28 VAC power outputs with OFF position.
- Unit provides up to 1 Amp max. per channel not to exceed a total of 4 Amp (100 VA) maximum current.
- Class 2 rated power limited outputs.
- PTC protected outputs.
- PTCs are rated @ 1 Amp per channel.
- Surge suppression.
Visual Indicators:
Features:
- Wall mount enclosure.
Warranty:
- Limited lifetime
Downloads
Condition | New |
---|---|
Brand | Altronix |
Balun Type | Transceiver Hub |
Channels | 4 |
Features | Data, Power |
Type | Passive |
Input Voltage | 115 VAC |
Rack Mountable | No |
Integral Camera Power | With Power |
Channels | 4 |
Connection Type | RJ-45 |
Form | Wall Mount |
Altronix HubSat4D passive UTP transceiver hub with integral camera power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 4 camera channels in a wall mount enclosure. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv or HubWayDv video balun/combiners. In addition, the unit features 24VAC or 28VAC PTC protected outputs and surge suppression. Optionally, the HubSat4D can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay, HubWayLD or HubWayLDH passive (non-amplified) and active (amplified) UTP transceiver hubs. In addition, the HubSat4D powers these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.
Input:
- 115 VAC 50/60 Hz, 1.25 Amp.
- Primary fuse is rated at 3.5 Amp/250 V.
Video:
- Four (4) channels of video over twisted-pair up to 750 ft.
- Four (4) 75 Ohm video outputs.
Data:
- RS422/RS485 data inputs.
Power:
- Individually selectable 24 VAC or 28 VAC power outputs with OFF position.
- Unit provides up to 1 Amp max. per channel not to exceed a total of 4 Amp (100 VA) maximum current.
- Class 2 rated power limited outputs.
- PTC protected outputs.
- PTCs are rated @ 1 Amp per channel.
- Surge suppression.
Visual Indicators:
Features:
- Wall mount enclosure.
Warranty:
- Limited lifetime
Downloads
Condition | New |
---|---|
Brand | Altronix |
Balun Type | Transceiver Hub |
Channels | 4 |
Features | Data, Power |
Type | Passive |
Input Voltage | 115 VAC |
Rack Mountable | No |
Integral Camera Power | With Power |
Channels | 4 |
Connection Type | RJ-45 |
Form | Wall Mount |