ENS HD-EV01P-VP-2 1 Channel HD Video & Power Passive Balun (Pair)
Product Highlights
The HD-EV01P-VP-2 from ENS is a 1 Channel HD Video & Power Passive Balun (Receiver & Transmitter). The HD-EV01P-VP-2 is video & power transmitter and receiver that allows the transmission of real-time CCTV HD video and power signal via cost-effective unshielded Twisted Paired (UTP) cable. Baseband (composite) signals of any type are supported. The HD-EV01P-VP-2 is compatible with all HD-TVI, HD-CVI and AHD analog camera. Used in pairs, HD-EV01P-VP-2 eliminates costly and bulky coaxial cable. The superior interference rejection and low emissions of the HD-EV01P-VP-2 allow video & power signals to coexist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. The HD-EV01P-VP-2 is built-in surge suppressor to protect video equipment against damaging voltage spikes. Its crosstalk and noise immunity ensure quality video signals.
The HD-EV01P-VP-2 is recommended to use with Unshielded Twisted Paired (UTP) wiring from 24AWG through 22AWG. Individually shielded pairs should be avoided, as they reduce the operating range of the systems drastically. Multi-pair cable (25-pair or more) with an overall shield are acceptable. Video signals can coexist in the same wire bundle as telephone, datacom, or low-voltages power circuits. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices must be removed from the pair.
Features
- 1CH HD Video & Power Transmitter & Receiver (12V/24V DC/AC)
- Real-time transmission over UTP cat5e/6
- NTSC, PAL & SECAM video format compatible
- Compatible with all HD-TVI, HD-CVI, AHD & CVBS analog cameras
- Color video max up to 440m (1443ft) for HD-CVI 720P camera If you adjust saturation of DVR, max up to 470m (1541ft)
- Color video max up to 230m (754ft) for HD-CVI 1080P camera - Color video max up to 190m (623ft) for Hikvision TVI 720P camera
- Color video max up to 190m (623ft) for Hikvision TVI 1080P camera - Color video max up to 230m (754ft) for TVT HD-TVI 720P camera
- Color video max up to 220m (721ft) for TVT HD-TVI 1080P camera - Color video max up to 320m (1049ft) for AHD 720P camera
- Color video max up to 320m (1049ft) for AHD 960P camera
- Color video max up to 250m (820ft) for AHD 1080P camera - Color video max up to 400m (1312ft) for CVBS camera
- Male BNC with extended 5.9inch (150mm)mini-coax pigtail
- RJ45 Jack for UTP cable
- Built-in TVS (Transient Voltage Suppressor) for surge protection
- Wave Filter Design, Anti-Static Design
- Lightning protection design Grade: III
- 60 dB crosstalk and noise immunity
- Exceptional interference rejection
- ABS engineering plastic housing
| Condition | New |
|---|---|
| Brand | ENS |
| Integral Camera Power | With Power |
| Channels | 1 |
| Connection Type | BNC, RJ-45 |
| Form | Stand-Alone |
The HD-EV01P-VP-2 from ENS is a 1 Channel HD Video & Power Passive Balun (Receiver & Transmitter). The HD-EV01P-VP-2 is video & power transmitter and receiver that allows the transmission of real-time CCTV HD video and power signal via cost-effective unshielded Twisted Paired (UTP) cable. Baseband (composite) signals of any type are supported. The HD-EV01P-VP-2 is compatible with all HD-TVI, HD-CVI and AHD analog camera. Used in pairs, HD-EV01P-VP-2 eliminates costly and bulky coaxial cable. The superior interference rejection and low emissions of the HD-EV01P-VP-2 allow video & power signals to coexist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. The HD-EV01P-VP-2 is built-in surge suppressor to protect video equipment against damaging voltage spikes. Its crosstalk and noise immunity ensure quality video signals.
The HD-EV01P-VP-2 is recommended to use with Unshielded Twisted Paired (UTP) wiring from 24AWG through 22AWG. Individually shielded pairs should be avoided, as they reduce the operating range of the systems drastically. Multi-pair cable (25-pair or more) with an overall shield are acceptable. Video signals can coexist in the same wire bundle as telephone, datacom, or low-voltages power circuits. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices must be removed from the pair.
Features
- 1CH HD Video & Power Transmitter & Receiver (12V/24V DC/AC)
- Real-time transmission over UTP cat5e/6
- NTSC, PAL & SECAM video format compatible
- Compatible with all HD-TVI, HD-CVI, AHD & CVBS analog cameras
- Color video max up to 440m (1443ft) for HD-CVI 720P camera If you adjust saturation of DVR, max up to 470m (1541ft)
- Color video max up to 230m (754ft) for HD-CVI 1080P camera - Color video max up to 190m (623ft) for Hikvision TVI 720P camera
- Color video max up to 190m (623ft) for Hikvision TVI 1080P camera - Color video max up to 230m (754ft) for TVT HD-TVI 720P camera
- Color video max up to 220m (721ft) for TVT HD-TVI 1080P camera - Color video max up to 320m (1049ft) for AHD 720P camera
- Color video max up to 320m (1049ft) for AHD 960P camera
- Color video max up to 250m (820ft) for AHD 1080P camera - Color video max up to 400m (1312ft) for CVBS camera
- Male BNC with extended 5.9inch (150mm)mini-coax pigtail
- RJ45 Jack for UTP cable
- Built-in TVS (Transient Voltage Suppressor) for surge protection
- Wave Filter Design, Anti-Static Design
- Lightning protection design Grade: III
- 60 dB crosstalk and noise immunity
- Exceptional interference rejection
- ABS engineering plastic housing
| Condition | New |
|---|---|
| Brand | ENS |
| Integral Camera Power | With Power |
| Channels | 1 |
| Connection Type | BNC, RJ-45 |
| Form | Stand-Alone |
Customers also viewed
Check items to add to the cart or select all
