NVT NV-314A Passive Video/Audio Transceiver
Product Highlights
The NVT Model NV-314A Video/Audio Transceiver is a passive (non-amplified) device that allows transmission of real-time monochrome or color video and audio over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
The unparalleled interference rejection and low emissions of the Model NV-314A allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. "Up-the-coax" type signal may be sent over the same wire pair.
The NV-314A comes with an RJ45 patch-cord. For rack-mounting, use the NV-418AR (which contains hardware equivalent to two NV-314As) with the NV-RM15 rack system.
Applications include Security/Surveillance, Video Distribution, or Distance Learning.
- Full-motion monochrome or color video and audio at distances up to: 750ft (225m) when used with another passive transceiver and 3,000ft (1km) when used with an active receiver such as the NV-518A
- No power required
- Built-in transient protection
- Exceptional interference rejection
- Supports "up-the-coax" type control signals
- Frequency Response DC to 10 MHz
- RJ45 and RCA jack connections
- Limited lifetime warranty
Downloads
| Condition | New |
|---|---|
| Brand | NVT |
| Balun Type | Transceiver Balun |
| Channels | 1 |
| Features | Audio |
| Type | Passive |
| Rack Mountable | No |
| Product Type | Passive Transceiver |
| Channels | 1 |
| Connection Type | RCA, RJ-45 |
| Form | Stand - Alone |
The NVT Model NV-314A Video/Audio Transceiver is a passive (non-amplified) device that allows transmission of real-time monochrome or color video and audio over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
The unparalleled interference rejection and low emissions of the Model NV-314A allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. "Up-the-coax" type signal may be sent over the same wire pair.
The NV-314A comes with an RJ45 patch-cord. For rack-mounting, use the NV-418AR (which contains hardware equivalent to two NV-314As) with the NV-RM15 rack system.
Applications include Security/Surveillance, Video Distribution, or Distance Learning.
- Full-motion monochrome or color video and audio at distances up to: 750ft (225m) when used with another passive transceiver and 3,000ft (1km) when used with an active receiver such as the NV-518A
- No power required
- Built-in transient protection
- Exceptional interference rejection
- Supports "up-the-coax" type control signals
- Frequency Response DC to 10 MHz
- RJ45 and RCA jack connections
- Limited lifetime warranty
Downloads
| Condition | New |
|---|---|
| Brand | NVT |
| Balun Type | Transceiver Balun |
| Channels | 1 |
| Features | Audio |
| Type | Passive |
| Rack Mountable | No |
| Product Type | Passive Transceiver |
| Channels | 1 |
| Connection Type | RCA, RJ-45 |
| Form | Stand - Alone |
Customers also viewed
Check items to add to the cart or select all
