Altronix HubWay83Di 8 Channel Passive UTP Hub/Balun Kit, Isolated Power
Altronix HubWay83Di 8 Channel Passive UTP Hub/Balun Kit, Isolated Power
***Includes eight (8) UL Listed accessory AC (HubWayDv) video balun/combiners.***
**HubWay83Di has CAT-5 connectors on front & BNC connectors on rear of unit**
Altronix HubWay83Di passive (non-amplified) UTP transceiver hub with integral isolated camera power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8 camera channels in a space saving 1U EIA 19" rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv (included) or HubWayDvi video balun/combiners. In addition, the unit features individually selectable 24VAC or 28VAC fuse protected outputs with surge suppression. An optional HubSat4Di passive (non-amplified) UTP transceiver hub with integral isolated camera power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay83Di. In addition, the HubSat4Di provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.
Input:
- 115VAC 50/60Hz, 2.5 Amp or 230VAC 50/60Hz, 1.5 Amp.
Video:
- Eight (8) channels of video over twisted pair up to a distance of 750 ft. per channel.
- Eight (8) 75 Ohm composite video outputs.
Data:
- RS422/RS485 data inputs.
Power:
- Individually selectable 24VAC or 28VAC power outputs with OFF position.
- Electronically isolated camera power.
- Unit provides up to 1 Amp max. per channel not to exceed a total of 8 Amp maximum current.
- Class 2 Rated power limited outputs.
- PTC protected outputs are rated @ 1 Amp per channel.
- Surge suppression.
Visual Indicators:
- AC input power indicator.
- Eight (8) individual power LED indicators.
Features:
- Illuminated master power disconnect circuit breaker with manual reset.
- IEC-320 - 3-wire grounded line (power) cord (detachable).
- Unit can be rack, wall or shelf mounted.
- 1U EIA 19" rack mount chassis.
Warranty
- Limited lifetime
Downloads
| Condition | New |
|---|---|
| Brand | Altronix |
| Balun Type | Twisted Pair Kit |
| Channels | 8 |
| Features | Data, Power |
| Type | Passive |
| Input Voltage | 115 VAC, 230 VAC |
| Rack Mountable | Yes |
| Integral Camera Power | With Power |
| Channels | 8 |
| Connection Type | RS422, RS485 |
| Form | Rack Mount, Wall Mount |
***Includes eight (8) UL Listed accessory AC (HubWayDv) video balun/combiners.***
**HubWay83Di has CAT-5 connectors on front & BNC connectors on rear of unit**
Altronix HubWay83Di passive (non-amplified) UTP transceiver hub with integral isolated camera power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8 camera channels in a space saving 1U EIA 19" rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv (included) or HubWayDvi video balun/combiners. In addition, the unit features individually selectable 24VAC or 28VAC fuse protected outputs with surge suppression. An optional HubSat4Di passive (non-amplified) UTP transceiver hub with integral isolated camera power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay83Di. In addition, the HubSat4Di provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.
Input:
- 115VAC 50/60Hz, 2.5 Amp or 230VAC 50/60Hz, 1.5 Amp.
Video:
- Eight (8) channels of video over twisted pair up to a distance of 750 ft. per channel.
- Eight (8) 75 Ohm composite video outputs.
Data:
- RS422/RS485 data inputs.
Power:
- Individually selectable 24VAC or 28VAC power outputs with OFF position.
- Electronically isolated camera power.
- Unit provides up to 1 Amp max. per channel not to exceed a total of 8 Amp maximum current.
- Class 2 Rated power limited outputs.
- PTC protected outputs are rated @ 1 Amp per channel.
- Surge suppression.
Visual Indicators:
- AC input power indicator.
- Eight (8) individual power LED indicators.
Features:
- Illuminated master power disconnect circuit breaker with manual reset.
- IEC-320 - 3-wire grounded line (power) cord (detachable).
- Unit can be rack, wall or shelf mounted.
- 1U EIA 19" rack mount chassis.
Warranty
- Limited lifetime
Downloads
| Condition | New |
|---|---|
| Brand | Altronix |
| Balun Type | Twisted Pair Kit |
| Channels | 8 |
| Features | Data, Power |
| Type | Passive |
| Input Voltage | 115 VAC, 230 VAC |
| Rack Mountable | Yes |
| Integral Camera Power | With Power |
| Channels | 8 |
| Connection Type | RS422, RS485 |
| Form | Rack Mount, Wall Mount |
Customers also viewed
Check items to add to the cart or select all
