NVT NV-716J-PVD 16 Channel Power-Video-Data Cable Integrator Hub

Typically installed in the wiring closet or IDF room, the NV-716J-PVD is a passive "pass-through" wiring device that efficiently consolidates camera power, video, and pan/tilt/zoom telemetry data onto a minimum of 4-pair RJ45 cables.

Power, video and data are converted at the camera using a PVD(tm) transceiver which utilizes a single 4-pair cable with RJ45 connectors to deliver each camera's signals to the NV-716J-PVD. Up to sixteen cameras are supported. The NV-716J-PVD receives low-voltage camera power from any third-party multi-output Class 2 power supply. Control Room connections are achieved with a single 4-pair RJ45 cable for each group of four cameras. P/T/Z telemetry data, if required, passes through another 4-pair RJ45 cable. Control Room connections may be made using any multi-channel NVT receiver or hub. All equipment employs industry-standard EIA/TIA 568B pinouts.

• Connectivity for up to sixteen cameras, each via a single RJ45 4-pair cable
• Use with the NV-216A-PV or NV-218A-PVD transceivers or the NV-226J-PV transmitter at the camera
• Uses any third-party power supply to power cameras via UTP over significant distances (see Power Distance Calculator)
• Cable-management solution from the camera to the Wiring Closet and on to the Control Room
• 1U high; 1" deep; wall or rack-mountable
• Limited lifetime warranty