NVT NV-226J-PV Single Channel UTP Video Transmitter & 12VDC Converter
The NV-226J-PV Video Transmitter +12VDC Converter is a passive (non-amplified) video transmitter combined with a 24VAC-to-12VDC converter. Designed to fit on the back of a fixed 12 VDC camera, this unit is architected to convert 24VAC power from the control room, while delivering real-time baseband (composite) video at extended distances, all over one 4-pair UTP cable.
The NV-226J-PV Video Transmitter +12VDC Converter is a passive (non-amplified) video transmitter combined with a 24VAC-to-12VDC converter. Designed to fit on the back of a fixed 12 VDC camera, this unit is architected to convert 24VAC power from the control room, while delivering real-time baseband (composite) video at extended distances, all over one 4-pair UTP cable.
The unparalleled interference rejection and low emissions of the NV-226J-PV allows video and low- voltage power to coexist within the same 4-pair cable, using structured (EIA 568B) wiring practices. It is recommended that the 24VAC not share the same jacketed wire bundle with telecom or datacom signals.
The NV-226J-PV carries a limited lifetime warranty, is UL and cUL listed, and is CE, WEEE, and RoHs compliant.
- Extended distance camera power and video routed through UTP and RJ45
- Supports 12VDC cameras with onboard regulated power
- Use with NVT's PVD(tm) Power Supply Hubs and Cable Integrators
- Up to 3000ft (1km) with a NVT DigitalEQ(tm) Active Receiver (see Power Distance Calculator)
- Up to 1500ft (460m) with a NVT StubEQ(tm) Hub (see Power Distance Calculator)
- Exceptional interference rejection
- Built-in transient protection
- Limited lifetime warranty
Downloads
| Condition | New |
|---|---|
| Brand | NVT |
| Balun Type | Transmitter Balun |
| Channels | 1 |
| Features | Power |
| Type | Passive |
| Rack Mountable | No |
| Channels | 1 |
| Connection Type | BNC, RJ-45, Screw Terminals |
| Form | Stand-Alone |
The NV-226J-PV Video Transmitter +12VDC Converter is a passive (non-amplified) video transmitter combined with a 24VAC-to-12VDC converter. Designed to fit on the back of a fixed 12 VDC camera, this unit is architected to convert 24VAC power from the control room, while delivering real-time baseband (composite) video at extended distances, all over one 4-pair UTP cable.
The unparalleled interference rejection and low emissions of the NV-226J-PV allows video and low- voltage power to coexist within the same 4-pair cable, using structured (EIA 568B) wiring practices. It is recommended that the 24VAC not share the same jacketed wire bundle with telecom or datacom signals.
The NV-226J-PV carries a limited lifetime warranty, is UL and cUL listed, and is CE, WEEE, and RoHs compliant.
- Extended distance camera power and video routed through UTP and RJ45
- Supports 12VDC cameras with onboard regulated power
- Use with NVT's PVD(tm) Power Supply Hubs and Cable Integrators
- Up to 3000ft (1km) with a NVT DigitalEQ(tm) Active Receiver (see Power Distance Calculator)
- Up to 1500ft (460m) with a NVT StubEQ(tm) Hub (see Power Distance Calculator)
- Exceptional interference rejection
- Built-in transient protection
- Limited lifetime warranty
Downloads
| Condition | New |
|---|---|
| Brand | NVT |
| Balun Type | Transmitter Balun |
| Channels | 1 |
| Features | Power |
| Type | Passive |
| Rack Mountable | No |
| Channels | 1 |
| Connection Type | BNC, RJ-45, Screw Terminals |
| Form | Stand-Alone |
