
NVT NV-813 8 Channel Passive Video Transceiver Hub
NVT NV-813 8 Channel Passive Video Transceiver Hub
The NVT Model NV-813 is an 8 port passive transceiver hub that allow transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
"Up-the-coax" type signal may be sent over the same wire pair at distances up to 750ft (225m).
The unparalleled interference rejection ability of the Model NV-813 Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. With built-in transient protection, damaging voltage spike problems are eliminated.
- High-Density 19" 1U high enclosure features 8 ports
- Use with any NVT passive transceiver or hub as a rack-mountable passive transceiver for full motion CCTV at distances up to 750ft (225m)
- Use with any NVT DigitalEQTM Hub or active receiver as a rack-mountable passive transmitter for distances up to 3,000ft (1km)
- Use with any NVT StubEQTM for distances up to 1,500ft (460m)
- RJ45 video connectivity with optional NV-RJ45A RJ45 to-screw-terminal adaptors included
- No power required
- Exceptional interference rejection
- Built-in transient protection
- Supports "up-the coax" type control signal up to 750ft (225m)
- Compatible with qualified UTP cameras
- Includes eight 2ft (60cm) coax jumper cables and rackmount hardware
- Limited lifetime warranty
Downloads
Condition | New |
---|---|
Brand | NVT |
Balun Type | Transceiver Hub |
Channels | 8 |
Type | Passive |
Rack Mountable | Yes |
Product Type | Passive Transceiver Hub |
Channels | 8 |
Connection Type | BNC, RJ-45, Screw Terminals |
Form | Rack Mount |
The NVT Model NV-813 is an 8 port passive transceiver hub that allow transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
"Up-the-coax" type signal may be sent over the same wire pair at distances up to 750ft (225m).
The unparalleled interference rejection ability of the Model NV-813 Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. With built-in transient protection, damaging voltage spike problems are eliminated.
- High-Density 19" 1U high enclosure features 8 ports
- Use with any NVT passive transceiver or hub as a rack-mountable passive transceiver for full motion CCTV at distances up to 750ft (225m)
- Use with any NVT DigitalEQTM Hub or active receiver as a rack-mountable passive transmitter for distances up to 3,000ft (1km)
- Use with any NVT StubEQTM for distances up to 1,500ft (460m)
- RJ45 video connectivity with optional NV-RJ45A RJ45 to-screw-terminal adaptors included
- No power required
- Exceptional interference rejection
- Built-in transient protection
- Supports "up-the coax" type control signal up to 750ft (225m)
- Compatible with qualified UTP cameras
- Includes eight 2ft (60cm) coax jumper cables and rackmount hardware
- Limited lifetime warranty
Downloads
Condition | New |
---|---|
Brand | NVT |
Balun Type | Transceiver Hub |
Channels | 8 |
Type | Passive |
Rack Mountable | Yes |
Product Type | Passive Transceiver Hub |
Channels | 8 |
Connection Type | BNC, RJ-45, Screw Terminals |
Form | Rack Mount |