Comnet NWK1IC Gen 3 Industrially Hardened Narrow Bandwidth Wireless Radio, Supports Distances up to 2 mi/3.2 km
Product Highlights
The NetWave® NWK1IC Industrial Grade high performance point-to-point wireless radio kit is ideal for high capacity and scalable deployments where channel overlapping and interference typically cause our discounted competitors radios to become unstable. The wide range of channel spectrum widths available on the NWK1IC series of radios gives you the option of narrowing channel bandwidths as your network grows which will increase the number of non-overlapping channels and improve stability.
The NWK1IC comes standard with an integrated antenna and an IP67 rated impact resistant polycarbonate enclosure that is designed to survive the most extreme conditions. The NWK1 is FCC certified for use in the United States. The NWK2 is ETSI, DFS and TPC certified for use in the European Union. The NWK1IC is certified for use in
Canada.
Features
- Narrow Channel Spectrum Widths for Large and Noisy Deployments
- 5, 10, 20 and 40 Mhz Channel Bandwidth Support
- Up to 240 Mbps Throughput
- 802.11a/n Compliant
- Distances up to 2 mi (FCC) or 2km (ETSI)
- IEEE802.3at PoE Compliant PD on Port 1
- IEEE802.3af Power Source (PSE) available on Port 2
- Secure Transmission: WPA2 – AES or TKIP Encryption
- ComNet Antenna Alignment Feature Eases Installation and Setup
- RF Spectrum Survey Tools
- Antenna Alignment Tools
- Status Indicating LEDs Provide Rapid Indication of Critical Operating Parameters
- Scalable Narrow Channel 5 and 10 MHz Bandwidths will Allow you to Expand your WLAN without Losing Reliability by increasing the Total Number of Non-Overlapping Channels
- Firmware Upgrades included free for the Life of the Product
- Installation and Configuration Trainings Available
- Electric Port Supports Auto-Negotiation for Full Duplex or Half Duplex Data Throughput
| Condition | New |
|---|---|
| Brand | Comnet |
| Frequency | 5180 - 5825 MHz |
The NetWave® NWK1IC Industrial Grade high performance point-to-point wireless radio kit is ideal for high capacity and scalable deployments where channel overlapping and interference typically cause our discounted competitors radios to become unstable. The wide range of channel spectrum widths available on the NWK1IC series of radios gives you the option of narrowing channel bandwidths as your network grows which will increase the number of non-overlapping channels and improve stability.
The NWK1IC comes standard with an integrated antenna and an IP67 rated impact resistant polycarbonate enclosure that is designed to survive the most extreme conditions. The NWK1 is FCC certified for use in the United States. The NWK2 is ETSI, DFS and TPC certified for use in the European Union. The NWK1IC is certified for use in
Canada.
Features
- Narrow Channel Spectrum Widths for Large and Noisy Deployments
- 5, 10, 20 and 40 Mhz Channel Bandwidth Support
- Up to 240 Mbps Throughput
- 802.11a/n Compliant
- Distances up to 2 mi (FCC) or 2km (ETSI)
- IEEE802.3at PoE Compliant PD on Port 1
- IEEE802.3af Power Source (PSE) available on Port 2
- Secure Transmission: WPA2 – AES or TKIP Encryption
- ComNet Antenna Alignment Feature Eases Installation and Setup
- RF Spectrum Survey Tools
- Antenna Alignment Tools
- Status Indicating LEDs Provide Rapid Indication of Critical Operating Parameters
- Scalable Narrow Channel 5 and 10 MHz Bandwidths will Allow you to Expand your WLAN without Losing Reliability by increasing the Total Number of Non-Overlapping Channels
- Firmware Upgrades included free for the Life of the Product
- Installation and Configuration Trainings Available
- Electric Port Supports Auto-Negotiation for Full Duplex or Half Duplex Data Throughput
| Condition | New |
|---|---|
| Brand | Comnet |
| Frequency | 5180 - 5825 MHz |
Customers also viewed
Check items to add to the cart or select all
