Comnet NW10DRE Industrially Hardened Dual Radio Wireless Bridge
Product Highlights
The NW10DRE is a industrially hardened, narrow bandwidth, dual wireless radio used for redundant ring and drop & repeat topologies when used with an external antenna. Radio 1 is a 19dBi 17° internal antenna while radio 2 has dual N-Female connectors for an external 5GHz antenna. The wide range of channel spectrum widths available on the NW10DR series of radios gives you the option of using wide channel widths for high throughput deployments that have little interference and noise while the narrow channel widths will increase the number of available non overlapping channels and improve stability in crowded RF environments but decrease maximum throughput. The NW10DR is FCC certified for use in North America.
- Narrow Channel Spectrum Widths for large and noisy deployments
- 5,10,20 and 40 Mhz Channel Bandwidth Support
- Up to 240 Mbps Throughput
- 802.11a/n Compliant
- Distances up to 2 miles
- IEEE802.3at PoE Compliant PD on port 1
- IEEE802.3af power source (PSE) available on port 2
- Environmentally Hardened -40º to +75ºC
- Meets class IP67 dust and water immersion protection standards
- Secure transmission: WPA2 – AES or TKIP encryption
- ComNet Antenna alignment feature eases installation and setup
- RF Spectrum Survey Tools
- Antenna Alignment Tools
Downloads
Condition | New |
---|---|
Brand | Comnet |
Application | Point-to-Multipoint |
Wireless Device | Access Points |
Video Input | IP: RJ-45 (x1) |
PoE Support | Yes |
Frequency | 5180 MHz - 5825 MHz |
Distance | 2 Miles |
Data Transfer Rate | 240 Mbps |
Antenna Type | Not Included |
Weatherproof | Outdoor |
The NW10DRE is a industrially hardened, narrow bandwidth, dual wireless radio used for redundant ring and drop & repeat topologies when used with an external antenna. Radio 1 is a 19dBi 17° internal antenna while radio 2 has dual N-Female connectors for an external 5GHz antenna. The wide range of channel spectrum widths available on the NW10DR series of radios gives you the option of using wide channel widths for high throughput deployments that have little interference and noise while the narrow channel widths will increase the number of available non overlapping channels and improve stability in crowded RF environments but decrease maximum throughput. The NW10DR is FCC certified for use in North America.
- Narrow Channel Spectrum Widths for large and noisy deployments
- 5,10,20 and 40 Mhz Channel Bandwidth Support
- Up to 240 Mbps Throughput
- 802.11a/n Compliant
- Distances up to 2 miles
- IEEE802.3at PoE Compliant PD on port 1
- IEEE802.3af power source (PSE) available on port 2
- Environmentally Hardened -40º to +75ºC
- Meets class IP67 dust and water immersion protection standards
- Secure transmission: WPA2 – AES or TKIP encryption
- ComNet Antenna alignment feature eases installation and setup
- RF Spectrum Survey Tools
- Antenna Alignment Tools
Downloads
Condition | New |
---|---|
Brand | Comnet |
Application | Point-to-Multipoint |
Wireless Device | Access Points |
Video Input | IP: RJ-45 (x1) |
PoE Support | Yes |
Frequency | 5180 MHz - 5825 MHz |
Distance | 2 Miles |
Data Transfer Rate | 240 Mbps |
Antenna Type | Not Included |
Weatherproof | Outdoor |