Linear DXSR-1504 Supervised 4-Channel Receiver

The Model DXSR-1504 Supervised 4-Channel Receiver is a four channel supervised digital receiver with solid state outputs designed for use with Linear’s DX and DXS Format transmitters. This receiver can be used in a variety of security and remote control applications. When the receiver detects a signal from a transmitter programmed into its memory, the appropriate channel output activates. The channel outputs have three optional configurations; momentary, toggle on/off, and latch until restored. Status and low battery outputs are for supervisory indications. Cutting jumpers select which channels require supervisory status reports from transmitters.

The Model DXSR-1504 incorporates a dual high-sensitivity superheterodyne diversity receiver with two whip antennas. This type of receiver provides superior performance by preventing loss of signal due to multi-path interference.

• Dual diversity superheterodyne receivers
• Compatible with DX and DXS transmitters
• Measured line-of-sight range of 1,500 Feet
• Quick-learn programming
• Selectable supervision
• Individual outputs per RF channel for alarm, low battery, and status trouble reports
• 7-segment channel display (decimal point indicates RF activity)
• LED Indication for alarm, low battery, and status
• Solid state outputs
• 100 mA maximum output rating
• Selectable outputs per channel: momentary, latch, toggle
• Operating voltage: 10.2 to 14.4 VDC or 12 to 16 VAC
• Current consumption: 30 mA standby, 120 mA operating @ 12 VDC
• 7.25" W x 5.0" H x 1.0" D (without antennas)