The Optex AX-100TFR is an outdoor battery operated and wireless-ready photoelectric detector featuring a 100' detection zone.
The battery powered AX-100TFR is a revolution in the perimeter security industry, offering a significant cost saving alternative to a traditional hardwired system. No trenching or wiring is required, drastically reducing labor time and installation costs. The unit comes wireless ready with a multi-functional back box and is compatible with most manufacturers wireless systems. The AX-100TFR comes with four 3.6V batteries (two for each side), with an average lifespan of 5 years.
Model AX-100TFR has an average battery lifespan of five (5) years. Uses four LSH20 (3.6 V, 13 Ah) batteries manufactured by SAFT.
The spacious multi-function back box has room for wireless transmitters, lead wires, output terminals, batteries, and is tamper-resistant.
It allows you to easily replace the batteries without opening the front cover. Not necessary to do the optical alignment.
Form C output activates when either cover or back box as well as chassis is removed.
The unit automatically outputs when the battery power becomes low. *To monitor the low battery signal, another wireless transmitter is required. Low battery LED will flicker when a front cover is removed.
Alarm signals are sent periodically to avoid missed alarm while the beam is broken. Its function is effective for wireless systems which do not recognize "Restore" status.
Alarm output activation are limited by a timer to 2 minutes. Even if there are continuous alarm events, the alarm output operates only once in the timer period. It prolongs the battery life of a wireless transmitter
99% beam blocking stability; 4 selectable beam frequencies; D.Q. circuit (environmental disqualification); N.C./N.O. output selection switch; A.G.C. circuit; International Protection (IP55); Beam interruption adjustment function; High-grade aspherical lens; Easy angle adjustment function.
|Features||Form C Relay, Tamper Switch|