Bosch B465-MR-120WI Universal Dual Path Communicator Kit

The B465-MR-120WI Conettix Universal Dual Path Communicator converts the Public Switch Telephone Network (PSTN) digital dialer, or dry contact outputs from an intrusion/ fire control panel to an IP signal for transmission over the Ethernet or cellular network. The B465 Conettix Universal Dual Path Communicator is UL 864 10th Edition approved per NFPA 72 version 2013.The module can use its built-in Ethernet connection, and/or an optional Conettix plug-in cellular module (B440/B441/B442/B443) to send reports to the central station receiver. Automation programming for the supported controlpanel remains unchanged with the installation of the B465 module, thus simplifying the installation process. This allows for a smooth transition from the PSTN realm into IP. All messages generated internally by the B465 are shown in Contact ID format at the central station. The module can be powered from a 16.5 VAC transformer or 24 VDC power supply.

The B10R-1640-120WI Red Medium Enclosure with 16.5 VAC 40 VA Transformer houses the D1640-120WI wired-in transformer, and select Bosch control panels and modules. The enclosures is compatible with an optional enclosure tamper switch and optional lock and key set, and holds one 7 or 18 Ah batteries.

The B46 External Annunciator is an optional module that uses audio and LEDs to show System Trouble, Power, and Battery status through a knockout on select enclosure doors. The B46 is an optional module that provides external module LED and sounder status when installed in a supported enclosure. The module has 3 LEDs (System Trouble, Power, and Battery) which illuminate through the B46 LED cover. The LED cover snaps into a knockout in the enclosure door.

The D101 is a lock and key set.

B465-MR-120WI Features

• Compatible with any control panel using Contact ID, SIA, Pulse 3/1 or Pulse 4/2 communication formats (auto detecting)
• No control panel reprogramming required to install
• Supports Ethernet directly and optional plug-in cellular communication technologies in single, or multi-path configurations
• Supports four configurable inputs and three configurable outputs
• Approved for Commercial Fire/Burglary applications as sole, primary, or secondary communication path

B10R-1640-120WI Features

• Enclosed 16.5 VAC 40 VA transformer
• Easy to install standoff locations for mounting supporting modules
• Red matte finish for fire applications
• Punch outs for optional B46 External Annunciator (for B465 only)
• Additional slow-blow fuse included in fuse block

B46 Features

• Provides LED and sounder status for supporting modules
• Easy to install
• Easy to see visibility
• Compact size

D101 Features

• Lock and Key Set