Cantek CTW-POE-EX01A 10/100M PoE Extender (Power Over Ethernet)
Product Highlights
The CTW-POE-EX01A from Cantek is an Easy Cabling Installation, quite easy to be installed by simple plug and play. It is used between a Power Source Equipment (PSE) and the Powered Device (PD); it injects power to the PD without affecting the data transmission performance. The POE-E101 offers a cost-effective and quick solution to doubles the standard range of PoE from 100 to 200 meters. There are 2 RJ-45 ports in a compact mini box of PoE Extender, of which the IN port functions as "PoE (Data and Power) input" and the other port on the other side functions as "PoE (Data and Power) output". The "PoE OUT" port is also the power injectors which transmit DC Voltage to the Cat5e/6 cable and transfer data and power simultaneously between the PSE and PD Long Distance PoE and Data Extension Solution PoE-Ex01A is a newly designed and simple device which extends both the reach of Ethernet Data and IEEE 802.3af Power over Ethernet over the standard 100m (328 ft.) CAT5e/6 UTP cable to 200m, 300m or longer distance. Currently, PoE supported networking devices such as PoE IP Cameras, PoE Wireless Access Points, and PoE IP Phones have become the mainstream of network deployment because of the convenience of easy installation regardless of additional power supply. However, limited by the UTP cable specifications, only up to 100 meters (328 ft.) cable could be applied to IP-based and PoE powered devices (PD) installation. Therefore, the PoE-Ex01A is designed as the repeater to forward both Ethernet data and PoE power and thus range the PoE powered device installation. By just plug and play but no additional power supply or set up required, one single PoE-Ex01A can increase the PoE range to 200m. By daisy-chaining multiple PoE-Ex01As, it offers you great flexibility to extend the distance of PoE network to triple, quadruple further in length or more. Providing PoE and Ethernet data extension ability, the PoE-Ex01Ais an ideal solution for service providers, campuses and public areas networking application which requires PoE deployment of wireless access points, IP-based surveillance cameras or IP phones in any places. It enables you to centrally manage the power from one location easily, efficiently and cost effectively.
Features
- Reduced Installation Cost
- More than 100m (328 ft.) Ethernet and PoE Connection
- Fully IEEE 802.3af/IEEE 802.3at compliant
- Lighting-proof and Compact design
- Plug and Play. No configuration Required
- Support PoE power up to 15.4W
- Full rate network throughout the whole extended device
| Condition | New |
|---|---|
| Brand | Cantek |
| Distance | 301-400' |
The CTW-POE-EX01A from Cantek is an Easy Cabling Installation, quite easy to be installed by simple plug and play. It is used between a Power Source Equipment (PSE) and the Powered Device (PD); it injects power to the PD without affecting the data transmission performance. The POE-E101 offers a cost-effective and quick solution to doubles the standard range of PoE from 100 to 200 meters. There are 2 RJ-45 ports in a compact mini box of PoE Extender, of which the IN port functions as "PoE (Data and Power) input" and the other port on the other side functions as "PoE (Data and Power) output". The "PoE OUT" port is also the power injectors which transmit DC Voltage to the Cat5e/6 cable and transfer data and power simultaneously between the PSE and PD Long Distance PoE and Data Extension Solution PoE-Ex01A is a newly designed and simple device which extends both the reach of Ethernet Data and IEEE 802.3af Power over Ethernet over the standard 100m (328 ft.) CAT5e/6 UTP cable to 200m, 300m or longer distance. Currently, PoE supported networking devices such as PoE IP Cameras, PoE Wireless Access Points, and PoE IP Phones have become the mainstream of network deployment because of the convenience of easy installation regardless of additional power supply. However, limited by the UTP cable specifications, only up to 100 meters (328 ft.) cable could be applied to IP-based and PoE powered devices (PD) installation. Therefore, the PoE-Ex01A is designed as the repeater to forward both Ethernet data and PoE power and thus range the PoE powered device installation. By just plug and play but no additional power supply or set up required, one single PoE-Ex01A can increase the PoE range to 200m. By daisy-chaining multiple PoE-Ex01As, it offers you great flexibility to extend the distance of PoE network to triple, quadruple further in length or more. Providing PoE and Ethernet data extension ability, the PoE-Ex01Ais an ideal solution for service providers, campuses and public areas networking application which requires PoE deployment of wireless access points, IP-based surveillance cameras or IP phones in any places. It enables you to centrally manage the power from one location easily, efficiently and cost effectively.
Features
- Reduced Installation Cost
- More than 100m (328 ft.) Ethernet and PoE Connection
- Fully IEEE 802.3af/IEEE 802.3at compliant
- Lighting-proof and Compact design
- Plug and Play. No configuration Required
- Support PoE power up to 15.4W
- Full rate network throughout the whole extended device
| Condition | New |
|---|---|
| Brand | Cantek |
| Distance | 301-400' |
