Pelco EC-4BY1SWCPOE-W EthernetConnect 4-Port Self Managed POE Switch
Product Highlights
Pelco EC-4BY1SWCPOE-W | No Programming Required | Extended Temperature Operation of -40°C to 75°C (-40° to 167°F) | Electrical Ports Support Autonegotiation. Buy Now. Fast Shipping.
EC 4-Port SMS PoE Switch 30 Watts w/Coax Uplink.
The EthernetConnect EC-4BY1SWCPOE-W is an Ethernet switch with uplink management functionality that operates on the Ethernet over copper (EoC). It provides four ports operating at 10/100 Mbps and is designed to combine these four electrical ports into a single electrical extended port that forwards the data to the next network device. The switch does not require programming prior to use.
- BNC Connector
- No Programming Required
- 10/100 Mbps Ethernet
- Extended Temperature Operation of -40°C to 75°C (-40° to 167°F)
- 30 W PoE Capability on Ethernet Ports
- Electrical Ports Support Autonegotiation for 10 Mbps or 100 Mbps, Full-Duplex or Half-Duplex Data
- Pre-Programmed Port for Uplink
- Full 10/100 Mbps Bandwidth
- Supports Multicast and Unicast
- Automatic MDI/MDI-X Crossover
- Power and Activity Status LED Indicators
- Hot-Swappable Rack Modules
Downloads
Condition | New |
---|---|
Brand | Pelco |
NDAA Compliance | Yes |
Item Type | Network Switch |
Technology | Digital - IP |
Environment | Unhardened |
Data Rate | 10/100 Mbps |
Ports | 4-Ports |
Management | Self-managed |
Connectors | RJ-45 |
Form Factor | Rack |
PoE Budget | ~ 120 W |
Switch Fabric | Unspecified |
Uplink Ports | (1) 100Mbps TP |
Forwarding Rate | Unspecified |
# of Ports | 4 PORT |
Data Rate | 10/100 Mbps |
Management | Managed |
Form Factor | Rackmount |
PoE | Yes |
Pelco EC-4BY1SWCPOE-W | No Programming Required | Extended Temperature Operation of -40°C to 75°C (-40° to 167°F) | Electrical Ports Support Autonegotiation. Buy Now. Fast Shipping.
EC 4-Port SMS PoE Switch 30 Watts w/Coax Uplink.
The EthernetConnect EC-4BY1SWCPOE-W is an Ethernet switch with uplink management functionality that operates on the Ethernet over copper (EoC). It provides four ports operating at 10/100 Mbps and is designed to combine these four electrical ports into a single electrical extended port that forwards the data to the next network device. The switch does not require programming prior to use.
- BNC Connector
- No Programming Required
- 10/100 Mbps Ethernet
- Extended Temperature Operation of -40°C to 75°C (-40° to 167°F)
- 30 W PoE Capability on Ethernet Ports
- Electrical Ports Support Autonegotiation for 10 Mbps or 100 Mbps, Full-Duplex or Half-Duplex Data
- Pre-Programmed Port for Uplink
- Full 10/100 Mbps Bandwidth
- Supports Multicast and Unicast
- Automatic MDI/MDI-X Crossover
- Power and Activity Status LED Indicators
- Hot-Swappable Rack Modules
Downloads
Condition | New |
---|---|
Brand | Pelco |
NDAA Compliance | Yes |
Item Type | Network Switch |
Technology | Digital - IP |
Environment | Unhardened |
Data Rate | 10/100 Mbps |
Ports | 4-Ports |
Management | Self-managed |
Connectors | RJ-45 |
Form Factor | Rack |
PoE Budget | ~ 120 W |
Switch Fabric | Unspecified |
Uplink Ports | (1) 100Mbps TP |
Forwarding Rate | Unspecified |
# of Ports | 4 PORT |
Data Rate | 10/100 Mbps |
Management | Managed |
Form Factor | Rackmount |
PoE | Yes |