Altronix EFLOW3NB Single Output Power Supply Charger, 12/24VDC @ 2A, 115VAC, Board
Altronix
|
SKU: EFLOW3NB
|
Model: EFLOW3NB
Product Highlights
Altronix EFLOW3NB 2 Output Power Supply/Charger w/Fire Alarm
eFlow3NB is a UL Recognized power supply/charger which converts a 120VAC, 60Hz input into a single 12VDC or 24VDC power-limited output.
Features
- Input 120VAC 60Hz, 3.5 amp
- Power-limited output
- 12VDC or 24VDC selectable output
- 2 amp continuous supply current
- Filtered and electronically regulated output
- Aux. power-limited output rated @ 1 amp (unswitched)
- Over Voltage Protection
- Filtered and electronically regulated outputs
- Built-in charger for sealed lead acid or gel type batteries
- Maximum charge current 1.54 amp
- Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption
- Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger
- AC fail supervision (form "C" contacts)
- Battery fail & presence supervision (form "C" contacts)
- Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge
- AC input, DC output and Battery LED indicators
- Short circuit and overload protection
Downloads
(Size: 116.3 KB)
(Size: 504.8 KB)
Condition | New |
---|---|
Brand | Altronix |
Power Supply Type | Board |
# of Outputs | 1 |
Input Voltage | 120 VAC |
Output Voltage | 12 VDC, 24 VDC |
Output Current | 2.0 Amp |
Features | Battery Charger, Fire Alarm Disconnect, Low Power Shutdown, Surge Protection |
Output Type | DC |
Fire Alarm Interface | Yes |
Certifications | cUL, UL |
Power Options | 2 amp @ 12VDC, 2 amp @ 24VDC |
Output Protection | Electronic |
Number of Outputs | 1 |
Input Voltage | 120VAC |
Battery Charging | Yes |
eFlow3NB is a UL Recognized power supply/charger which converts a 120VAC, 60Hz input into a single 12VDC or 24VDC power-limited output.
Features
- Input 120VAC 60Hz, 3.5 amp
- Power-limited output
- 12VDC or 24VDC selectable output
- 2 amp continuous supply current
- Filtered and electronically regulated output
- Aux. power-limited output rated @ 1 amp (unswitched)
- Over Voltage Protection
- Filtered and electronically regulated outputs
- Built-in charger for sealed lead acid or gel type batteries
- Maximum charge current 1.54 amp
- Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption
- Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger
- AC fail supervision (form "C" contacts)
- Battery fail & presence supervision (form "C" contacts)
- Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge
- AC input, DC output and Battery LED indicators
- Short circuit and overload protection
Downloads
(Size: 116.3 KB)
(Size: 504.8 KB)
Condition | New |
---|---|
Brand | Altronix |
Power Supply Type | Board |
# of Outputs | 1 |
Input Voltage | 120 VAC |
Output Voltage | 12 VDC, 24 VDC |
Output Current | 2.0 Amp |
Features | Battery Charger, Fire Alarm Disconnect, Low Power Shutdown, Surge Protection |
Output Type | DC |
Fire Alarm Interface | Yes |
Certifications | cUL, UL |
Power Options | 2 amp @ 12VDC, 2 amp @ 24VDC |
Output Protection | Electronic |
Number of Outputs | 1 |
Input Voltage | 120VAC |
Battery Charging | Yes |