Altronix T2M7LXK1V 8-Door Altronix/Mercury Access and Power Integration Wired Kit
Product Highlights
Altronix T2M7LXK1V is a 8-door access and power integration kit which includes Altronix power and sub-assemblies along with factory installed wire management and wire assemblies that are pre-configured with terminal blocks for Mercury* hardware. This unit provides ample power and dual voltage outputs to support Mercury platform controllers and locking devices. The T2M7LXK1V accommodates one (1) Intelligent Dual Reader Controller and three (3) Dual Reader Interface Modules. Trove Plus simplifies field installations and provides reliable, robust critical power and control for the most demanding applications.*Also compatible with these authentic Mercury partners:AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls, Kastle, Keri Systems, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic i-PRO MonitorCast, Quintron, RS2, S2 Security, Schneider Electric, Vanderbilt
Features
AL1024XB2V Power Supply/Charger
Input
- Voltage: 220VAC (range 198VAC-256VAC), 50/60Hz, 2.5A
- Fusing: 5A / 250V
Outputs
- Voltage: 24VDC
- Current: 10A @ 24VDC continuous max
- Other: Overvoltage protection. Filtered and regulated
Battery Backup
- Capacity: 12AH/12VDC (Up to 2 within enclosure) 40AH/65AH (requires separate enclosure)
- Type: Sealed lead acid or gel type
- Failover: Upon AC loss, instantaneous
Supervision
- AC Failure: Form “C” contacts
- Battery: Form “C” contacts
Indicators LED
- Input: 220VAC is present
- DC Output: Powered
- Battery: Discharged or not connected
ACMS8 Access Power Controller
Input
- Voltage: 24VDC from AL1024XB2V and 12VDC from VR6
- Input Fuse: 15A / 32V
Outputs
- Voltage: 12VDC and/or 24VDC
- Eight (8) 24VDC independently controlled fused outputs:
- a) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A
- b) Auxiliary power outputs (unswitched)
- c) Any combination of the above
- Output Fuses: 3A/32V
Indicators (LED's)
- Red LEDs: Outputs are triggered (relays energized)
- Green LED: FACP disconnect is triggered
VR6 Voltage Regulator
Input
- Voltage: 24VDC from AL1024XB2V
Output
- Voltage: 12VDC
- Current: 6A continuous
- Other: Surge suppression
Indicators (LED)
- Input: 24VDC is present
- Output: Powered
PDS8 Dual Input Power Distribution Module
Input
- Voltage: 24VDC from AL1024XB2V and 12VDC from VR6
- Input Fuse: 10A / 32V
Outputs
- Voltage: 12VDC and/or 24VDC
- Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2
- Individual outputs may be set to OFF position for servicing
Outputs Ratings
- Fuses: 3A/32V
Indicators (LED)
- DC Output: Eight (8) individual output LEDs
- Green: 12VDC
- Red: 24VDC
Environmental
Temperature
- Operating: 0° C to 49° C (32° F to 120° F)
- Storage: - 20° C to 70° C ( - 4° F to 158° F)
Relative Humidity
- Relative Humidity 85% +/- 5%
BTU/Hr (approx.):
- 145 BTU/Hr
Condition | New |
---|---|
Brand | Altronix |
NDAA Compliance | No |
Output Type | DC |
Certifications | CE |
Power Options | 10 amp @ 24VDC |
Output Protection | Fuse |
Number of Outputs | 8 |
Input Voltage | 220VAC |
Version | Indoor wallmount |
Altronix T2M7LXK1V is a 8-door access and power integration kit which includes Altronix power and sub-assemblies along with factory installed wire management and wire assemblies that are pre-configured with terminal blocks for Mercury* hardware. This unit provides ample power and dual voltage outputs to support Mercury platform controllers and locking devices. The T2M7LXK1V accommodates one (1) Intelligent Dual Reader Controller and three (3) Dual Reader Interface Modules. Trove Plus simplifies field installations and provides reliable, robust critical power and control for the most demanding applications.*Also compatible with these authentic Mercury partners:AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls, Kastle, Keri Systems, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic i-PRO MonitorCast, Quintron, RS2, S2 Security, Schneider Electric, Vanderbilt
Features
AL1024XB2V Power Supply/Charger
Input
- Voltage: 220VAC (range 198VAC-256VAC), 50/60Hz, 2.5A
- Fusing: 5A / 250V
Outputs
- Voltage: 24VDC
- Current: 10A @ 24VDC continuous max
- Other: Overvoltage protection. Filtered and regulated
Battery Backup
- Capacity: 12AH/12VDC (Up to 2 within enclosure) 40AH/65AH (requires separate enclosure)
- Type: Sealed lead acid or gel type
- Failover: Upon AC loss, instantaneous
Supervision
- AC Failure: Form “C” contacts
- Battery: Form “C” contacts
Indicators LED
- Input: 220VAC is present
- DC Output: Powered
- Battery: Discharged or not connected
ACMS8 Access Power Controller
Input
- Voltage: 24VDC from AL1024XB2V and 12VDC from VR6
- Input Fuse: 15A / 32V
Outputs
- Voltage: 12VDC and/or 24VDC
- Eight (8) 24VDC independently controlled fused outputs:
- a) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A
- b) Auxiliary power outputs (unswitched)
- c) Any combination of the above
- Output Fuses: 3A/32V
Indicators (LED's)
- Red LEDs: Outputs are triggered (relays energized)
- Green LED: FACP disconnect is triggered
VR6 Voltage Regulator
Input
- Voltage: 24VDC from AL1024XB2V
Output
- Voltage: 12VDC
- Current: 6A continuous
- Other: Surge suppression
Indicators (LED)
- Input: 24VDC is present
- Output: Powered
PDS8 Dual Input Power Distribution Module
Input
- Voltage: 24VDC from AL1024XB2V and 12VDC from VR6
- Input Fuse: 10A / 32V
Outputs
- Voltage: 12VDC and/or 24VDC
- Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2
- Individual outputs may be set to OFF position for servicing
Outputs Ratings
- Fuses: 3A/32V
Indicators (LED)
- DC Output: Eight (8) individual output LEDs
- Green: 12VDC
- Red: 24VDC
Environmental
Temperature
- Operating: 0° C to 49° C (32° F to 120° F)
- Storage: - 20° C to 70° C ( - 4° F to 158° F)
Relative Humidity
- Relative Humidity 85% +/- 5%
BTU/Hr (approx.):
- 145 BTU/Hr
Condition | New |
---|---|
Brand | Altronix |
NDAA Compliance | No |
Output Type | DC |
Certifications | CE |
Power Options | 10 amp @ 24VDC |
Output Protection | Fuse |
Number of Outputs | 8 |
Input Voltage | 220VAC |
Version | Indoor wallmount |