Altronix T2M7LXK2 6-Door Altronix/Mercury Access and Power Integration Kit
Product Highlights
Altronix T2M7LXK2 is a 6-door access and power integration kit which includes Altronix power and sub-assemblies along with factory installed wire management and wire assemblies that are pre-configured with terminal blocks for Mercury* hardware. This unit provides ample power and dual voltage outputs to support Mercury platform controllers and locking devices. The T2M7LXK2 accommodates one (1) Intelligent Controller and three (3) Dual Reader Interface Modules. Trove Plus simplifies field installations and provides reliable, robust critical power and control for the most demanding applications.
Features
AL1024ULXB2 Power Supply/Charger
Input
- Voltage: 115VAC, 60Hz, 4.2A max
- Main Fuse: 5A / 250V
Output
- Voltage: 24VDC
- Current: 10A @ 24VDC continuous max
- Other: Overvoltage protection. Filtered and regulated
Battery Backup
- Capacity: 12AH /12VDC (2 within enclosure), 40 AH / 65 AH (requires separate enclosure)
- Type: Sealed lead acid or gel type
- Failover: Upon AC loss, instantaneous
Supervision
- AC Failure: Form “C” contacts
- Battery: Form “C” contacts
Indicators LED
- Input: 115VAC is present
- DC Output: Powered
- Battery: Discharged or not connected
VR6 Voltage Regulator
Input
- Voltage: 24VDC from AL1024ULXB2
Output
- Voltage: 12VDC
- Current: 6A continuous
- Other: Surge suppression
Indicators LED
- Input: 24VDC is present
- Output: Powered
ACMS8 Dual Input Access Power Controller
Input
- Voltage: 24VDC from AL1024ULXB2
- Input Fuse: 10A / 250V
Outputs
- Voltage: 24VDC
- Eight (8) 24VDC independently controlled fused outputs:
- a) Fail-Safe and/or Fail-Secure power outputs
- Form “C” Relays rated 28VAC or VDC @ 2.5A
- b) Auxiliary power outputs (unswitched)
- c) Any combination of the above
Outputs Ratings
- Fuses: 3.5A/250V
Indicators (LED's)
- Red LEDs: Outputs are triggered (relays energized)
- Green LED: FACP disconnect is triggered
PDS8 Dual Input Power Distribution Module
Input
- Voltage: 12VDC from VR6 and 24VDC from AL1024ULXB2
- Input Fuse: 10A / 32V
Outputs
- Voltage: 12VDC and/or 24VDC
- Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2
- Individual outputs may be set to OFF position for servicing
Outputs Ratings
- Fuses: 3A/32V
Indicators (LED's)
- DC Output: Eight (8) individual output LEDs
- Green: 12VDC
- Red: 24VDC
Environmental
Temperature
- Operating: 0° C to 49° C (32° F to 120° F)
- Storage: - 20° C to 70° C ( - 4° F to 158° F)
Relative Humidity
- Relative Humidity 85% +/- 5%
BTU/Hr (approx.):
- 145 BTU/Hr
Condition | New |
---|---|
Brand | Altronix |
NDAA Compliance | No |
Output Type | DC |
Certifications | CE |
Power Options | 10 amp @ 24VDC |
Output Protection | Fuse |
Number of Outputs | 8 |
Input Voltage | 115VAC |
Version | Indoor wallmount |
Altronix T2M7LXK2 is a 6-door access and power integration kit which includes Altronix power and sub-assemblies along with factory installed wire management and wire assemblies that are pre-configured with terminal blocks for Mercury* hardware. This unit provides ample power and dual voltage outputs to support Mercury platform controllers and locking devices. The T2M7LXK2 accommodates one (1) Intelligent Controller and three (3) Dual Reader Interface Modules. Trove Plus simplifies field installations and provides reliable, robust critical power and control for the most demanding applications.
Features
AL1024ULXB2 Power Supply/Charger
Input
- Voltage: 115VAC, 60Hz, 4.2A max
- Main Fuse: 5A / 250V
Output
- Voltage: 24VDC
- Current: 10A @ 24VDC continuous max
- Other: Overvoltage protection. Filtered and regulated
Battery Backup
- Capacity: 12AH /12VDC (2 within enclosure), 40 AH / 65 AH (requires separate enclosure)
- Type: Sealed lead acid or gel type
- Failover: Upon AC loss, instantaneous
Supervision
- AC Failure: Form “C” contacts
- Battery: Form “C” contacts
Indicators LED
- Input: 115VAC is present
- DC Output: Powered
- Battery: Discharged or not connected
VR6 Voltage Regulator
Input
- Voltage: 24VDC from AL1024ULXB2
Output
- Voltage: 12VDC
- Current: 6A continuous
- Other: Surge suppression
Indicators LED
- Input: 24VDC is present
- Output: Powered
ACMS8 Dual Input Access Power Controller
Input
- Voltage: 24VDC from AL1024ULXB2
- Input Fuse: 10A / 250V
Outputs
- Voltage: 24VDC
- Eight (8) 24VDC independently controlled fused outputs:
- a) Fail-Safe and/or Fail-Secure power outputs
- Form “C” Relays rated 28VAC or VDC @ 2.5A
- b) Auxiliary power outputs (unswitched)
- c) Any combination of the above
Outputs Ratings
- Fuses: 3.5A/250V
Indicators (LED's)
- Red LEDs: Outputs are triggered (relays energized)
- Green LED: FACP disconnect is triggered
PDS8 Dual Input Power Distribution Module
Input
- Voltage: 12VDC from VR6 and 24VDC from AL1024ULXB2
- Input Fuse: 10A / 32V
Outputs
- Voltage: 12VDC and/or 24VDC
- Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2
- Individual outputs may be set to OFF position for servicing
Outputs Ratings
- Fuses: 3A/32V
Indicators (LED's)
- DC Output: Eight (8) individual output LEDs
- Green: 12VDC
- Red: 24VDC
Environmental
Temperature
- Operating: 0° C to 49° C (32° F to 120° F)
- Storage: - 20° C to 70° C ( - 4° F to 158° F)
Relative Humidity
- Relative Humidity 85% +/- 5%
BTU/Hr (approx.):
- 145 BTU/Hr
Condition | New |
---|---|
Brand | Altronix |
NDAA Compliance | No |
Output Type | DC |
Certifications | CE |
Power Options | 10 amp @ 24VDC |
Output Protection | Fuse |
Number of Outputs | 8 |
Input Voltage | 115VAC |
Version | Indoor wallmount |