Altronix T2PDK75F16S 16-Door Altronix/PDK Red™ Access and Power Integration Kit

Altronix T2PDK75F16S kit consists of Trove2 enclosure, TPD2 PDK Red™/Altronix backplane with one (1) 24VDC @ 10A, one (1) 12VDC @ 10A power supply/charger, two (2) eight (8) fuse protected dual input/output access control modules, one (1) 12VDC voltage regulator and one (1) eight (8) fuse protected power distribution modules. This kit also accommodates up to four (4) PDK Red™ modules for up to sixteen (16) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.

Features

eFlow104NB Power Supply/Charger - 1

Input

• Voltage: 120VAC, 60Hz, 4.5A
• Main Fuse: 6.5A / 250V

Output

• Voltage: 24VDC @ 10A
• Auxiliary: 1A (unswitched)
• Other: Overvoltage protection. Filtered and regulated

eFlow102NB Power Supply/Charger - 2

Input

• Voltage: 120VAC, 60Hz, 3.5A
• Main Fuse: 5A / 250V

Output

• Voltage: 12VDC @ 10A
• Auxiliary: 1A (unswitched)
• Other: Overvoltage protection. Filtered and regulated

Both Power Supplies:

IBattery Backup

Fire Alarm Disconnect

• Supervised: Latching or non-latching
• EOL: 10K Resistor

Supervision

• AC Failure: Form “C” contacts
• Battery: Form “C” contacts
• Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge

Indicators LED

• AC Input: 120VAC is present
• DC Output: Powered
• Battery: Discharged or not connected

VR6 Voltage Regulator

Input

• Voltage: 24VDC from eFlow104NB

Output

• Voltage: 12VDC
• Current: 6A continuous
• Other: Surge suppression

Indicators LED

• Input: 24VDC is present
• Output: Powered

PD8UL Power Distribution Module

Input

• Voltage: 12VDC from eFlow104NB

Outputs

• Voltage: 12VDC
• Fuses: 3.5A/250V

Indicators LED

• Green LED: DC Output

Two (2) ACMS8 Dual Input Access Power Controllers

Input

• Voltage: 24VDC from eFlow104NB and 12VDC from VR6
• Input Fuse: 15A / 32V

Outputs

• Voltage: 12VDC and/or 24VDC
• Eight (8) independently controlled fused outputs:
• a) Fail-Safe and/or Fail-Secure power outputs Form “C” Relays rated 28VAC or VDC @ 2.5A
• b) Auxiliary power outputs (unswitched)
• c) Any combination of the above

Outputs Ratings

• Fuses: 3A/32V

Indicators (LED's)

• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

Environmental

Temperature

• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: - 20° C to 70° C ( - 4° F to 158° F)

Relative Humidity

• Relative Humidity 85% +/- 5%

BTU/Hr (approx.):

• 290 BTU/Hr