Altronix EFLOW102NXV Power Supply Charger, Single Output, 12VDC @ 10A, Aux Output, FAI, LinQ2 Ready
Product Highlights
Altronix eFlow102NXV is a power supply/charger that converts a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into a single 12VDC output with a total of 10A max. The unit includes an unswitched aux. output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.
Input
- 220VAC (working range 198VAC - 256VAC), 50/60Hz, 2.1A
- Input fuse: 5A/250V
Output
- 12VDC @ 10A supply current
- Auxiliary output rated @ 1A (unswitched)
- Overvoltage protection
Battery Backup
- Built-in charger for sealed lead acid or gel type batteries
- Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption
Supervision
- AC fail supervision (form "C" contacts)
- Notification trigger is selectable for 30 seconds (factory set) or 2 hours
- Battery fail and presence supervision (form "C" contacts)
- Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% (depending on the power supply). Prevents deep battery discharge
Fire Alarm Disconnect
- Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger
Electrical
Temperature
- Operating: 0° C to 49° C (32° F to 120° F)
- Storage: - 20° C to 70° C ( - 4° F to 158° F)
Visual Indicators
- Green AC Power LED indicates 220VAC present
- AC input and DC output LED indicators
Additional Features
- Short circuit and overload protection
- Unit is complete with power supply, enclosure, battery leads, and cam lock
Condition | New |
---|---|
Brand | Altronix |
NDAA Compliance | No |
Type | Indoor Wallmount |
Output Type | DC |
Power Options | 10 amp @ 12VDC |
Input Voltage | 220VAC |
Output Protection | Fuse |
Fire Alarm Interface | Yes |
Battery Charging | Yes |
Certification | CE |
Altronix eFlow102NXV is a power supply/charger that converts a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into a single 12VDC output with a total of 10A max. The unit includes an unswitched aux. output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.
Input
- 220VAC (working range 198VAC - 256VAC), 50/60Hz, 2.1A
- Input fuse: 5A/250V
Output
- 12VDC @ 10A supply current
- Auxiliary output rated @ 1A (unswitched)
- Overvoltage protection
Battery Backup
- Built-in charger for sealed lead acid or gel type batteries
- Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption
Supervision
- AC fail supervision (form "C" contacts)
- Notification trigger is selectable for 30 seconds (factory set) or 2 hours
- Battery fail and presence supervision (form "C" contacts)
- Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% (depending on the power supply). Prevents deep battery discharge
Fire Alarm Disconnect
- Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger
Electrical
Temperature
- Operating: 0° C to 49° C (32° F to 120° F)
- Storage: - 20° C to 70° C ( - 4° F to 158° F)
Visual Indicators
- Green AC Power LED indicates 220VAC present
- AC input and DC output LED indicators
Additional Features
- Short circuit and overload protection
- Unit is complete with power supply, enclosure, battery leads, and cam lock
Condition | New |
---|---|
Brand | Altronix |
NDAA Compliance | No |
Type | Indoor Wallmount |
Output Type | DC |
Power Options | 10 amp @ 12VDC |
Input Voltage | 220VAC |
Output Protection | Fuse |
Fire Alarm Interface | Yes |
Battery Charging | Yes |
Certification | CE |