Axis 0778-001 Communications F34 Main Unit

AXIS F34 Main Unit. 4-channel main unit to be used with any of AXIS F Sensor Units. Supports 1080p in 15/12.5 fps or 720p in full frame rate. Axis' Zipstream technology for reduced bandwidth and storage needs. Video motion detection and active tampering alarm. Supports edge storage through NAS or SD cards (optional). Two SD card slots. Power over Ethernet or 8-28 V DC input. Power supply not included.

AXIS F34 enables simultaneous streaming of views from four different areas through one Ethernet port. The installation cost–with the main unit, four sensor units and other system components–can be lower than the cost of a system that involves four comparable standard network cameras. AXIS F34 has two built-in full-sized SD card slots for local storage of recordings. The main unit supports Power over Ethernet and 8-28 V DC.

Each channel of AXIS F34 supports a 1080p or 720p capture mode and multiple, individually configurable streams. AXIS F34 can operate any combination of the two modes across the channels simultaneously. A capture mode sets the maximum resolution and frame rate. In the 1080p mode, the maximum resolution is 1080p (1920 x 1080 pixels) and the maximum frame rate is 12.5/15 frames per second (50/60 Hz). It provides the full viewing angle from a 1080p sensor unit.

• Streams 1080p/HDTV 720p videos from four sensor units simultaneously
• Quad view stream
• Axis' Zipstream technology
• Two built-in SD card slots

AXIS is a registered trademark of Axis AB. Axis AB is not affiliated with 123SecurityProducts.com