Visonic MCT-302 Wireless Magnetic Contact Transmitter with 1 INPUT, UL

The MCT-302 is a fully supervised, PowerCode magnetic contact transmitter. For UL installations, the MCT-302 is for use with the UL listed control unit, model PowerMax+ only. The transmitter includes a built-in reed switch (that opens upon removal of a magnet placed near it) and an auxiliary hard-wired input, programmable as either N.C. or E.O.L., for use with additional sensors - pushbuttons, detectors, door contacts etc.

An on-board DIP switch allows the installer to disable the magnetoperated reed switch if only the auxiliary input is needed.

The reed switch and the auxiliary input behave as separate transmitters, although they trigger the same RF transmitter. Each input has a unique 24-bit PowerCode ID, selected in the factory from over 16 million possible code combinations.

Since messages transmitted by the MCT-302 might collide with transmissions from other PowerCode transmitters, a "smart" anti- collision transmission sequence is used.

• Magnetic contact and auxiliary input for external devices
• 2 input transmitter
• User-selectable operation of auxiliary input as NC or EOL (end-of-line loop with NC or NO sensors)
• Include hardwired auxiliary input for external devices
• Back tamper switch detects removal from place (model MCT-302 )
• Superior transmission range
• Fully supervised
• PowerCode ID factory-selected from 16 million possible combinations
• Smart anti-collision mechanism supports multiple simultaneous transmissions
• Long-life standard lithium battery included
• Low-battery signaling
• Available in several optional frequencies in compliance with international standards
• Compatible with PowerMax(tm) and all Visonic PowerCode wireless panels and receivers