Muxlab 500762-RX HDMI over IP H.264/H.265 PoE Receiver
Product Highlights
The 500762-RX from Muxlab is an HDMI over IP H.264/H.265 PoE extender receiver allows HDMI source and display equipment to be extended locally up to 330ft (100m) at up to 4K @ 60Hz resolution via Cat5e/6 cable in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations via a local Ethernet network, in a low bandwidth, flexible, expandable and cost effective manner, without the need to install dedicated cabling systems. The exceptionally low bandwidth requirements of this device combination allows for streaming audio/video content over a local network, over WiFi, and over the Internet for distributed installations spread-out throughout the globe. The Receiver also accepts H.264/H.265 video streams from other transmitting devices of up to 4K @ 60Hz, and supports a USB 3.0 Type A connector for playback of local content from an external USB drive. This devices support PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.
Features
- Receiver supports up to 4K @ 60Hz (4:4:4) video streams
- Extends local audio/video transmission up to 330ft (100m) over Cat5e/6
- H.264/265 video codec, excellent for LAN, WiFi & Internet transmission
- High image quality and 100ms latency depending on protocol
- Supports 100's of RX devices depending on network bandwidth
- Supports Multicast, RTSP, RTMP, HLS, FLV and TS
- USB 3.0 port for playback of local content from external USB drive
- Supports SPDIF (TosLink) Audio Out
- RS232 and Directional IR for remote control of end-devices
- PoE powered, via PoE (PSE) Ethernet Switch
- Supports 100’s of TX & RX devices depending on network bandwidth
- Managed via Pro Digital Network Controller (500811 and 500812), MuxControl iOS and Android App, and third party Apps
Condition | New |
---|---|
Brand | MuxLab |
NDAA Compliance | No |
Product Type | HDMI over IP Receiver |
Channels | 2 |
Connection Type | HDMI, RS232 |
Form | Stand - Alone |
The 500762-RX from Muxlab is an HDMI over IP H.264/H.265 PoE extender receiver allows HDMI source and display equipment to be extended locally up to 330ft (100m) at up to 4K @ 60Hz resolution via Cat5e/6 cable in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations via a local Ethernet network, in a low bandwidth, flexible, expandable and cost effective manner, without the need to install dedicated cabling systems. The exceptionally low bandwidth requirements of this device combination allows for streaming audio/video content over a local network, over WiFi, and over the Internet for distributed installations spread-out throughout the globe. The Receiver also accepts H.264/H.265 video streams from other transmitting devices of up to 4K @ 60Hz, and supports a USB 3.0 Type A connector for playback of local content from an external USB drive. This devices support PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.
Features
- Receiver supports up to 4K @ 60Hz (4:4:4) video streams
- Extends local audio/video transmission up to 330ft (100m) over Cat5e/6
- H.264/265 video codec, excellent for LAN, WiFi & Internet transmission
- High image quality and 100ms latency depending on protocol
- Supports 100's of RX devices depending on network bandwidth
- Supports Multicast, RTSP, RTMP, HLS, FLV and TS
- USB 3.0 port for playback of local content from external USB drive
- Supports SPDIF (TosLink) Audio Out
- RS232 and Directional IR for remote control of end-devices
- PoE powered, via PoE (PSE) Ethernet Switch
- Supports 100’s of TX & RX devices depending on network bandwidth
- Managed via Pro Digital Network Controller (500811 and 500812), MuxControl iOS and Android App, and third party Apps
Condition | New |
---|---|
Brand | MuxLab |
NDAA Compliance | No |
Product Type | HDMI over IP Receiver |
Channels | 2 |
Connection Type | HDMI, RS232 |
Form | Stand - Alone |