Alpha NC365B Pager Transmitter - NC300/TC500
Product Highlights
Pager Transmitter - NC300/TC500 Used NC300 / NC300II / TC500 Systems. Use with NC397A Pocket Pagers.The NC365B Transmitter/Control Unit (on-site paging system) receives alphanumeric messages and patient call information via serial interface and transmits the information directly to the NC397A pocket pagers. Information is sent to the transmitter at 9600 baud to minimize bottlenecks. Call type and location are determined by the system supplying information to the transmitter. The NC365B Paging System Transmitter/Control Unit is pre-programmed for use with the Alpha Communications® NC300 (or NC300II) nurse-call systems, or TC500 emergency-call systems. The Unit is designed for on site paging requirements only and not for long range.
The range of the system will largely depend on the site and location of the transmitter unit. To determine the exact range and coverage of the transmitter, a site survey must be done. Contact Alpha Communications® for details on site surveys. For estimation purposes of a properly located NC365B, a range of up to one mile can be expected (line of sight), under ideal conditions. See the instruction manual for additional details. Other antennas and signal amplification options are available to increase range, contact Alpha Communications®. Battery back-up also available, by using the model# BA365K kit.
- Operates with NC300, NC300II, TC500 or NC110A/NC110N/NC150N/NC200N
- systems (requires NC377 series voltage interface adapter)
- System covers a radius of up to one mile (site survey must be done to verify range)
- 9600 baud serial input, 1200 baud transmit
- Supports NC397A (and other) pocket pagers
- 8 dry contact alarm inputs
Downloads
| Condition | New |
|---|---|
| Brand | Alpha |
| Home Control | Wi-Fi |
| Frequency | 457.55 MHz |
Pager Transmitter - NC300/TC500 Used NC300 / NC300II / TC500 Systems. Use with NC397A Pocket Pagers.The NC365B Transmitter/Control Unit (on-site paging system) receives alphanumeric messages and patient call information via serial interface and transmits the information directly to the NC397A pocket pagers. Information is sent to the transmitter at 9600 baud to minimize bottlenecks. Call type and location are determined by the system supplying information to the transmitter. The NC365B Paging System Transmitter/Control Unit is pre-programmed for use with the Alpha Communications® NC300 (or NC300II) nurse-call systems, or TC500 emergency-call systems. The Unit is designed for on site paging requirements only and not for long range.
The range of the system will largely depend on the site and location of the transmitter unit. To determine the exact range and coverage of the transmitter, a site survey must be done. Contact Alpha Communications® for details on site surveys. For estimation purposes of a properly located NC365B, a range of up to one mile can be expected (line of sight), under ideal conditions. See the instruction manual for additional details. Other antennas and signal amplification options are available to increase range, contact Alpha Communications®. Battery back-up also available, by using the model# BA365K kit.
- Operates with NC300, NC300II, TC500 or NC110A/NC110N/NC150N/NC200N
- systems (requires NC377 series voltage interface adapter)
- System covers a radius of up to one mile (site survey must be done to verify range)
- 9600 baud serial input, 1200 baud transmit
- Supports NC397A (and other) pocket pagers
- 8 dry contact alarm inputs
Downloads
| Condition | New |
|---|---|
| Brand | Alpha |
| Home Control | Wi-Fi |
| Frequency | 457.55 MHz |
Customers also viewed
Check items to add to the cart or select all
