Muxlab 500762-TX HDMI over IP H.264/H.265 PoE Transmitter, 1080p60
Product Highlights
The 500762-TX from Muxlab is an HDMI over IP H.264/H.265 PoE Extender Transmitter allows HDMI source and display equipment to be extended locally up to 330ft (100m) at up to 4K @ 60Hz resolution via Cat5e/6 cable in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations via a local Ethernet network, in a low bandwidth, flexible, expandable and cost effective manner, without the need to install dedicated cabling systems. The exceptionally low bandwidth requirements of this device combination allows for streaming audio/video content over a local network, over WiFi, and over the Internet for distributed installations spread-out throughout the globe. The transmitter accepts a 1080p @ 60Hz video and streams the content to the Receiver, where the signal is up-scaled up to 4K @ 60Hz to be displayed on a 4K monitor. This device support PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.
Features
- Transmitter and other devices up to 4K @ 60Hz
- Transmitter supports up to 1080p @ 60Hz video
- Extends local audio/video transmission up to 330ft (100m) over Cat5e/6
- H.264/265 video codec, excellent for LAN, WiFi & Internet transmission
- High image quality and 100ms latency depending on protocol
- Supports 100's of TX devices depending on network bandwidth
- Supports Multicast, RTSP, RTMP, HLS, FLV and TS
- RS232 and Directional IR for remote control of end-devices
- PoE powered, via PoE (PSE) Ethernet Switch
- Managed via Pro Digital Network Controller (500811), and MuxLab Control Smartphone & Tablet App
- Video Wall Support
- Multi-view Support
- New 200ms low latency mode (reduces latency from 300ms to 200ms)
Downloads
Condition | New |
---|---|
Brand | MuxLab |
NDAA Compliance | No |
Product Type | HDMI over IP Transmitter |
Channels | 2 |
Connection Type | HDMI, RS232 |
Form | Stand - Alone |
The 500762-TX from Muxlab is an HDMI over IP H.264/H.265 PoE Extender Transmitter allows HDMI source and display equipment to be extended locally up to 330ft (100m) at up to 4K @ 60Hz resolution via Cat5e/6 cable in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations via a local Ethernet network, in a low bandwidth, flexible, expandable and cost effective manner, without the need to install dedicated cabling systems. The exceptionally low bandwidth requirements of this device combination allows for streaming audio/video content over a local network, over WiFi, and over the Internet for distributed installations spread-out throughout the globe. The transmitter accepts a 1080p @ 60Hz video and streams the content to the Receiver, where the signal is up-scaled up to 4K @ 60Hz to be displayed on a 4K monitor. This device support PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.
Features
- Transmitter and other devices up to 4K @ 60Hz
- Transmitter supports up to 1080p @ 60Hz video
- Extends local audio/video transmission up to 330ft (100m) over Cat5e/6
- H.264/265 video codec, excellent for LAN, WiFi & Internet transmission
- High image quality and 100ms latency depending on protocol
- Supports 100's of TX devices depending on network bandwidth
- Supports Multicast, RTSP, RTMP, HLS, FLV and TS
- RS232 and Directional IR for remote control of end-devices
- PoE powered, via PoE (PSE) Ethernet Switch
- Managed via Pro Digital Network Controller (500811), and MuxLab Control Smartphone & Tablet App
- Video Wall Support
- Multi-view Support
- New 200ms low latency mode (reduces latency from 300ms to 200ms)
Downloads
Condition | New |
---|---|
Brand | MuxLab |
NDAA Compliance | No |
Product Type | HDMI over IP Transmitter |
Channels | 2 |
Connection Type | HDMI, RS232 |
Form | Stand - Alone |