Kramer VP-771-110V 9–Input ProScale™ Presentation Switcher/Scaler with Speaker Outputs

The VP-771 is a high-quality presentation switcher and scaler for a variety of signals. It accepts one of nine inputs: component video, DisplayPort (DP), 3G HD-SDI, two computer graphics, two composite video and two HDMI signals. It scales the video, embeds the audio, and outputs the signal to one HDMI, one computer graphics, one 3G HD-SDI and one DGKat TP, together with digital audio, unbalanced stereo and a 2x10-watt amplified balanced stereo speaker output.

Features

• K-IIT XL™ Picture-in-Picture Image Insertion Technology - Ultra-stable picture-in-picture, picture-and-picture, and split screen capability. Any video source can be inserted into or positioned next to any other video source with full window positioning and sizing controls
• Kramer’s PixPerfect™ Scaling Technology - Kramer’s precision pixel mapping and high quality scaling technology. High-quality 3:2 and 2:2 pull down de-interlacing and full up and down scaling of all video input signals
• Ultra-Fast Fade-Thru-Black (FTB™) Switching - Video switching transitions are clean and ultra fast. The video fades to black and the new input fades from black for smooth, glitch-free switching. The output signal provides constant sync so the display never glitches
• Advanced Deinterlacing Functions - Method, sync, selectable film modes, diagonal correction and motion detection sensitivity, 3:2 and 2:2 pull-down; 24sf handling
• HDTV Compatible
• HDCP Compliant - The HDCP (High Definition Content Protection) license agreement allows copy-protected data on the HDMI input to pass only to the HDMI output
• Multi-Standard Operation - SDI (SMPTE 259M and SMPTE 344M), HD-SDI (SMPTE 292M) and 3G HD-SDI (SMPTE 424M)
• Advanced Input and Output EDID Management
• Mass Notification Emergency Communication System (MNEC) - Activates a national or campus-wide notification, immediately displayed when an emergency situation develops. It uses automatic text overlaying, either via a crawler or a full screen cover up, as well as an optional audio alert
• DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables
• System Range - Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using Kramer DGKat cables
• Note: Transmission range depends on the signal resolution, graphics card and display used. If using third-party shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly
• Video Inputs - Component (Y, Pb, Pr) video on RCA connectors, DisplayPort (DP), SD/HD/3G HD-SDI (including SDI loop) on BNC connectors, 2 computer graphics on 15-pin HD connectors, 2 composite video on RCA connectors and 2 HDMI
• Scaled Outputs - HDMI, computer graphics on a 15-pin HD connector, SD/HD/3G HD-SDI on a BNC connector and DGKat twisted pair on an RJ-45 connector
• SDI Channelling - Select one active signal and three bypassed signals from eight embedded stereo audio channels
• Multiple Output Resolutions - Up to 2K and 1080p
• HDMI Deep Color Support
• Luma Keying - Via PIP window
• Vertical Key stoning
• Built-in ProcAmp - Color, sharpness, contrast, brightness and gamma are set individually for each input
• 3D Comb Filtering - Provides the best quality color separation for composite video inputs
• Built-in Time Base Corrector - Stabilizes unstable video sources
• Powerful Noise Reduction Filters - Temporal, block, mosquito and combing
• Picture Zooming - Both on main and PIP window from 100% to 1600%, including separate V and H sharpness control
• Multiple Aspect Ratio Selections - Follow input, follow output, best fit, letterbox and over scan
• Dual Window Display - Preset picture-in-picture, picture-and-picture and split screens, as well as customized window layouts
• Audio Inputs - 2 HDMI, 2 computer graphics and 1 DisplayPort and 1 microphone in on 3.5mm mini jacks; 2 CV and 1 S/PDIF on RCA connectors
• Audio Outputs - 1 S/PDIF on an RCA connector, 1 unbalanced stereo audio on a 3-pin terminal block connector
• Built-in Audio Power Amplifier - 10W per channel audio amplifier with speaker outputs
• HDMI Audio - Embeds/de-embeds HDMI audio with delay of 0-90msec for lip-sync correction
• Microphone Input - Supports mix and talk-over features, as well as 0-90msec delay to prevent feedback
• Non-Volatile Memory - Saves final settings
• Firmware Upgrades - Via Ethernet and RS-232
• Flexible Control Options - Front panel buttons, contact closure, OSD (on-screen display) via front panel buttons or IR remote (remote control included), Control Application software for use via Ethernet and RS-232
• Selectable Power Save Modes
• Worldwide Power Supply - 100-240V AC