Visonic MCT-100 Powercode Universal Transmitter w/ 2 Inputs
Visonic MCT-100 Powercode Universal Transmitter w/ 2 Inputs
MCT-100 is a fully supervised, two-input PowerCode(tm) wireless transmitter designed for protecting doors, windows or other objects and for use in a variety of security and control applications. This highly reliable top-performance wireless device is easy to install and operate in a wide range of residential and commercial environments.
MCT-100 transmitter is compatible with virtually any normally open (NO) or normally closed (NC) device connected to its two end-of-line (EOL) protected inputs: pushbuttons, sensors, contacts, switches and other detection devices.
When activated, each input initiates an individual 24-bit PowerCode ID message, which identifies it to the target receiver as a separate transmitter. Each ID code is randomly selected from 16 million possible combinations, and is therefore unique and virtually impossible to accidentally reproduce.
A smart anti-collision algorithm prevents signal jamming by simultaneous transmission from multiple devices. Periodic transmission of supervision signals is used to confirm system connectivity at all times.
- Two inputs with individual ID code on each input
- User-selectable operation of each input as NC (normally closed loop), or EOL (end-of-line loop with NC or NO sensors)
- Superior transmission range
- Fully supervised
- PowerCode ID factory-selected from 16 million possible combinations
- Smart anti-collision mechanism supports multiple simultaneous transmissions
- Long-life standard lithium battery included
- Low-battery signaling
- Available in several optional frequencies in compliance with international standards
- Compatible with PowerMax and all Visonic PowerCode wireless panels and receivers
Downloads
| Condition | New |
|---|---|
| Brand | Visonic |
| Home Control | Wi-Fi |
| Frequency | 315 MHz, 433.92 MHz, 868.95 MHz, 869.2625 MHz |
MCT-100 is a fully supervised, two-input PowerCode(tm) wireless transmitter designed for protecting doors, windows or other objects and for use in a variety of security and control applications. This highly reliable top-performance wireless device is easy to install and operate in a wide range of residential and commercial environments.
MCT-100 transmitter is compatible with virtually any normally open (NO) or normally closed (NC) device connected to its two end-of-line (EOL) protected inputs: pushbuttons, sensors, contacts, switches and other detection devices.
When activated, each input initiates an individual 24-bit PowerCode ID message, which identifies it to the target receiver as a separate transmitter. Each ID code is randomly selected from 16 million possible combinations, and is therefore unique and virtually impossible to accidentally reproduce.
A smart anti-collision algorithm prevents signal jamming by simultaneous transmission from multiple devices. Periodic transmission of supervision signals is used to confirm system connectivity at all times.
- Two inputs with individual ID code on each input
- User-selectable operation of each input as NC (normally closed loop), or EOL (end-of-line loop with NC or NO sensors)
- Superior transmission range
- Fully supervised
- PowerCode ID factory-selected from 16 million possible combinations
- Smart anti-collision mechanism supports multiple simultaneous transmissions
- Long-life standard lithium battery included
- Low-battery signaling
- Available in several optional frequencies in compliance with international standards
- Compatible with PowerMax and all Visonic PowerCode wireless panels and receivers
Downloads
| Condition | New |
|---|---|
| Brand | Visonic |
| Home Control | Wi-Fi |
| Frequency | 315 MHz, 433.92 MHz, 868.95 MHz, 869.2625 MHz |
Customers also viewed
Check items to add to the cart or select all
