Altronix HubWay8CD 8 Channel Passive UTP Transceiver Hub
Product Highlights
***Note: Altronix HubWay8CD has CAT-5 connectors on the front & BNC connectors on the rear of the unit. Model HubWay8CDS locates all connectors to the front of the unit.
Altronix HubWay8CD passive UTP transceiver hub with integral camera power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8 camera channels in a space saving 1U EIA 19" rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or HubWayDvi video balun/combiners. In addition, the unit features individually selectable 24 VAC or 28 VAC PTC protected outputs with surge suppression. An optional HubSat4D passive UTP transceiver hub with integral camera power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay8CD. In addition, the HubSat4D provides power to these cameras locally to virtually eliminate the possibility of voltage drop associated with long cable runs.
Input:
- 115 VAC 50/60Hz, 1.5 Amp.
Video:
- Eight (8) channels of video over twisted pair up to a distance of 750 ft. per channel.
- Eight (8) 75 Ohm composte video outputs.
Data:
- RS422/RS485 data inputs.
Power:
- Individually selectable 24 VAC or 28 VAC power outputs with OFF position.
- Unit provides up to 1 Amp max. per channel not to exceed a total of 5 Amp (150 VA) maximum current.
- PTC protected outputs are rated @ 1 Amp per channel.
- Surge suppression.
Visual Indicators:
- AC input power indicator.
- Eight (8) individual power LED indicators.
Features:
- Illuminated master power disconnect circuit breaker with manual reset.
- IEC-320 - 3-wire grounded line (power) cord (detachable).
Rack Chassis
- Unit can be rack, wall or shelf mounted.
- Modular 1U standard EIA 19" rack mount chassis.
- Dimensions: 1.625"H x 19.125"W x 8.5"D.
Warranty:
- Limited Lifetime
Downloads
| Condition | New |
|---|---|
| Balun Type | Transceiver Hub |
| Channels | 8 |
| Features | Data, Power |
| Type | Passive |
| Input Voltage | 115 VAC |
| Rack Mountable | Yes |
| Integral Camera Power | With Power |
| Channels | 8 |
| Connection Type | BNC, RJ-45, RS422, RS485 |
| Form | Rack Mount |
***Note: Altronix HubWay8CD has CAT-5 connectors on the front & BNC connectors on the rear of the unit. Model HubWay8CDS locates all connectors to the front of the unit.
Altronix HubWay8CD passive UTP transceiver hub with integral camera power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8 camera channels in a space saving 1U EIA 19" rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or HubWayDvi video balun/combiners. In addition, the unit features individually selectable 24 VAC or 28 VAC PTC protected outputs with surge suppression. An optional HubSat4D passive UTP transceiver hub with integral camera power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay8CD. In addition, the HubSat4D provides power to these cameras locally to virtually eliminate the possibility of voltage drop associated with long cable runs.
Input:
- 115 VAC 50/60Hz, 1.5 Amp.
Video:
- Eight (8) channels of video over twisted pair up to a distance of 750 ft. per channel.
- Eight (8) 75 Ohm composte video outputs.
Data:
- RS422/RS485 data inputs.
Power:
- Individually selectable 24 VAC or 28 VAC power outputs with OFF position.
- Unit provides up to 1 Amp max. per channel not to exceed a total of 5 Amp (150 VA) maximum current.
- PTC protected outputs are rated @ 1 Amp per channel.
- Surge suppression.
Visual Indicators:
- AC input power indicator.
- Eight (8) individual power LED indicators.
Features:
- Illuminated master power disconnect circuit breaker with manual reset.
- IEC-320 - 3-wire grounded line (power) cord (detachable).
Rack Chassis
- Unit can be rack, wall or shelf mounted.
- Modular 1U standard EIA 19" rack mount chassis.
- Dimensions: 1.625"H x 19.125"W x 8.5"D.
Warranty:
- Limited Lifetime
Downloads
| Condition | New |
|---|---|
| Balun Type | Transceiver Hub |
| Channels | 8 |
| Features | Data, Power |
| Type | Passive |
| Input Voltage | 115 VAC |
| Rack Mountable | Yes |
| Integral Camera Power | With Power |
| Channels | 8 |
| Connection Type | BNC, RJ-45, RS422, RS485 |
| Form | Rack Mount |
Customers also viewed
Check items to add to the cart or select all
