Linear DXR-702 2 Channel Digital Receiver
Product Highlights
This item is discontinued. Call (866) 440-2288 for Replacement
The DXR-702 is a two channel digital receiver with two isolated relay outputs designed for use with Linear’s DX Format transmitters. This receiver can be used in a variety of remote control applications. When the receiver detects a signal from a transmitter programmed into its memory, the appropriate relay output activates. The relays have four optional output configurations. When the relays are set to latch, the receiver outputs will follow the open/close door status sent from DXT31 door/window transmitters. In a typical installation, the receiver is connected to an alarm control panel, door strike, camera, high current relay or some other devices. Transmitters are used to activate or control the devices. The receiver should be mounted with the supplied mounting bracket indoors or outdoors inside a weather-resistant non-metallic housing.
Features
- 32 transmitter capacity
- RF activity indicator
- Quicklearn programming
- Operates on 1117 VDC or 1216 VAC power
- Two channels
- Low transmitter battery reporting
- DX format
- Two form "C" relay outputs
- One Amp contact rating @ 24 Volts AC/DC
- Selectable relay activation time
- Current consumption: 25 mA standby, 90 mA operating @ 12 VDC
- RF frequency: 315 MHz
- 5.5" W x 4.0" H x 1.25" D
Downloads
| Condition | New |
|---|---|
| Brand | Linear |
| NDAA Compliance | No |
| Frequency | 315 MHz |
The DXR-702 is a two channel digital receiver with two isolated relay outputs designed for use with Linear’s DX Format transmitters. This receiver can be used in a variety of remote control applications. When the receiver detects a signal from a transmitter programmed into its memory, the appropriate relay output activates. The relays have four optional output configurations. When the relays are set to latch, the receiver outputs will follow the open/close door status sent from DXT31 door/window transmitters. In a typical installation, the receiver is connected to an alarm control panel, door strike, camera, high current relay or some other devices. Transmitters are used to activate or control the devices. The receiver should be mounted with the supplied mounting bracket indoors or outdoors inside a weather-resistant non-metallic housing.
Features
- 32 transmitter capacity
- RF activity indicator
- Quicklearn programming
- Operates on 1117 VDC or 1216 VAC power
- Two channels
- Low transmitter battery reporting
- DX format
- Two form "C" relay outputs
- One Amp contact rating @ 24 Volts AC/DC
- Selectable relay activation time
- Current consumption: 25 mA standby, 90 mA operating @ 12 VDC
- RF frequency: 315 MHz
- 5.5" W x 4.0" H x 1.25" D
Downloads
| Condition | New |
|---|---|
| Brand | Linear |
| NDAA Compliance | No |
| Frequency | 315 MHz |
Customers also viewed
Check items to add to the cart or select all
